Mazdaspeed00's 2006 NFR street/track build
#1
Thread Starter
2006 NFR street/track & J's/Mugen Build
After about a 6 month search looking for the perfect 06+ NFR I was able to track one down 400 miles from my home in Southern California.
This will be my first S2000 that I will be modifying from a completely stock car. The car will spend 75% of it's time on the streets and the 25% on the track.
I'll be building this car in several stages and I will be primarily focusing on street-ability, reliability, and balance.
Car was purchased 10/28/2014 with 29,648 miles.
Pictures:
https://plus.google.com/photos/10409...CNGI_uv_2MHTDw
BEFORE: When I first purchased the car.
AFTER: In its current state.
Engine:
- Ballade Sports header
- Ballade Sports timing correction gear
- Ballade Sports TCT
- Ballade Sports air filter
- Ballade Sports silicon intake arm
- Ballade Sports 70mm throttle body
- Berk HFC 63mm
- Hondata FlashPro
- J's Racing magnetic drain bolt
- J's Racing transmission drain bolt
- J's Racing rear diff drain plug
- J's Racing oil cap - gold
- KCM Shorai battery kit
- Koyo radiator
- Mugen titanium dual exhaust
- Radium engineering oil catch can
- Spoon radiator cap
Wheels, Suspension, & Brakes:
- Ballade Sports stainless steel brake lines
- Ballade Sports stainless steel clutch line
- Brembo BBK - Comptech spec. - Front
- Eibach front and rear sway bars
- J's Racing front RCA S1 w/ camber plate
- J's Racing rear RCA S1 12mm
- Mugen MF10 17x9 +42, bronze w/ Yokohama AD08R 255/40/17 - street wheels
- Ohlin's DFV coilovers
- Project MU CR pads front and rear
- Racing Brake 2 piece rotor brake kit - Rear
- Rays steel lug nuts, black
- Spoon rigid collars
- Volk ZE40 17x9.5 +47, diamond dark gunmetal w/ RE-71R 255/40/17 - track wheels
Exterior:
- Downforce fenders
- J's Racing front tow hook
- J's Racing type 1 wing - 1600mm, 245mm stands
- Mugen HT - authentic
- Mugen license plate bolts
- OEM AP1 front bumper
- J's Racing half lip
- J's Racing CF canards
- Tamon rear duckbill spoiler
Interior:
- Amis shifter collar
- Ballade Sports front and rear hardtop brackets
- CR soft top delete button on center console
- CR trunk springs
- Bride RO seat rails w/ custom brackets
- NSX Type R shift boot, retrofitted for S2000
- NSX Type R horn button
- NSX Type S shift knob
- Modifry camera mount
- Momo Monte Carlo steering wheel, leather, 350mm, red stitch
- Spirit R Recaro seats (from RX-7)
- UK 4 piece S2000 floor mats, black
- Works Bell short hub
- Works Bell Rapfix II
This will be my first S2000 that I will be modifying from a completely stock car. The car will spend 75% of it's time on the streets and the 25% on the track.
I'll be building this car in several stages and I will be primarily focusing on street-ability, reliability, and balance.
Car was purchased 10/28/2014 with 29,648 miles.
Pictures:
https://plus.google.com/photos/10409...CNGI_uv_2MHTDw
BEFORE: When I first purchased the car.
AFTER: In its current state.
Engine:
- Ballade Sports header
- Ballade Sports timing correction gear
- Ballade Sports TCT
- Ballade Sports air filter
- Ballade Sports silicon intake arm
- Ballade Sports 70mm throttle body
- Berk HFC 63mm
- Hondata FlashPro
- J's Racing magnetic drain bolt
- J's Racing transmission drain bolt
- J's Racing rear diff drain plug
- J's Racing oil cap - gold
- KCM Shorai battery kit
- Koyo radiator
- Mugen titanium dual exhaust
- Radium engineering oil catch can
- Spoon radiator cap
Wheels, Suspension, & Brakes:
- Ballade Sports stainless steel brake lines
- Ballade Sports stainless steel clutch line
- Brembo BBK - Comptech spec. - Front
- Eibach front and rear sway bars
- J's Racing front RCA S1 w/ camber plate
- J's Racing rear RCA S1 12mm
- Mugen MF10 17x9 +42, bronze w/ Yokohama AD08R 255/40/17 - street wheels
- Ohlin's DFV coilovers
- Project MU CR pads front and rear
- Racing Brake 2 piece rotor brake kit - Rear
- Rays steel lug nuts, black
- Spoon rigid collars
- Volk ZE40 17x9.5 +47, diamond dark gunmetal w/ RE-71R 255/40/17 - track wheels
Exterior:
- Downforce fenders
- J's Racing front tow hook
- J's Racing type 1 wing - 1600mm, 245mm stands
- Mugen HT - authentic
- Mugen license plate bolts
- OEM AP1 front bumper
- J's Racing half lip
- J's Racing CF canards
- Tamon rear duckbill spoiler
Interior:
- Amis shifter collar
- Ballade Sports front and rear hardtop brackets
- CR soft top delete button on center console
- CR trunk springs
- Bride RO seat rails w/ custom brackets
- NSX Type R shift boot, retrofitted for S2000
- NSX Type R horn button
- NSX Type S shift knob
- Modifry camera mount
- Momo Monte Carlo steering wheel, leather, 350mm, red stitch
- Spirit R Recaro seats (from RX-7)
- UK 4 piece S2000 floor mats, black
- Works Bell short hub
- Works Bell Rapfix II
Last edited by mazdaspeed00; 06-01-2017 at 04:32 PM.
#6
nice base to build upon, I think NFR is my favourite s2k colour. All the best going forward.
Trending Topics
#9
I feel like this is going to be incredible.
Please don't disappoint me.
Congrats on the purchase!
Please don't disappoint me.
Congrats on the purchase!