Supra2k's s2000 mix build thread
#1
Supra2k's s2000 mix build thread
So I decided to make a build thread. I bought the s2000 bone stock in February and wanted to mod it from the start, so this is where it starts. I bought it with a dent on the driver door and damage on the quarter panel and with 140k miles. But everything ran great and I don't have pictures of the damages at the moment. When I bought the car, the next day I put in buddyclub n+ coilovers in and about a week later bought some rpf1 type rc
[attachment=29943:image.jpg]
[attachment=29944:image.jpg]
Then about 2 month ago, took the car to willow spring raceway(horsethief mile) and spun out pretty bad. Slid off over a ditch de-beaded 1 rim, put a hole in one of the barrels, and damaged all the lips but the good thing is that the car still drove fine. Oh and damage to fender and rocker panel(drivers side). They also said I was about 200 feet off the track.
[attachment=29945:image.jpg]
[attachment=29946:image.jpg]
And through the months I have collected some parts. Vis spoon bumper, js racing fender, js racing rear bumper and a brand new oem passenger head light.
[attachment=29947:image.jpg]
[attachment=29948:image.jpg]
[attachment=29949:image.jpg]
[attachment=29950:image.jpg]
a month ago I had the head completely rebuild with the injectors. Which I thought I had pictures of but I don't.
2 weeks ago I installed brembo bbk which ill post a picture with them on later. And note* they do not fit stock 16" rims didn't know that -.-"
[attachment=29951:image.jpg]
So I took my rpf1 to get them fix and got them back
[attachment=29952:image.jpg]
To be continued...
[attachment=29943:image.jpg]
[attachment=29944:image.jpg]
Then about 2 month ago, took the car to willow spring raceway(horsethief mile) and spun out pretty bad. Slid off over a ditch de-beaded 1 rim, put a hole in one of the barrels, and damaged all the lips but the good thing is that the car still drove fine. Oh and damage to fender and rocker panel(drivers side). They also said I was about 200 feet off the track.
[attachment=29945:image.jpg]
[attachment=29946:image.jpg]
And through the months I have collected some parts. Vis spoon bumper, js racing fender, js racing rear bumper and a brand new oem passenger head light.
[attachment=29947:image.jpg]
[attachment=29948:image.jpg]
[attachment=29949:image.jpg]
[attachment=29950:image.jpg]
a month ago I had the head completely rebuild with the injectors. Which I thought I had pictures of but I don't.
2 weeks ago I installed brembo bbk which ill post a picture with them on later. And note* they do not fit stock 16" rims didn't know that -.-"
[attachment=29951:image.jpg]
So I took my rpf1 to get them fix and got them back
[attachment=29952:image.jpg]
To be continued...
#5
Thread
Thread Starter
Forum
Replies
Last Post