Turbo S2000 Built by Xtreme Motorwerks in New jersey just completed building and dyno tuned
The car had a fully built motor and a GT40 turbo.
They tuned it with vp import fuel and it made 849whp@39psi.
i will post dyno soon and pics once he sends me some and ill also try to post video of the car being dyno'd.
Its hard to believe but its true.
Ill write up the complete specs of the car soon.

 

if it's true... can't wait to see the pics... but DAMN!! 39 PSI!!!!!!!!!!!!!!

 

god sometimes im happy to live in new jersey
looks like ill be going there for any turbo needs for the s2.
sweet deal, any idea whats necessary to run 39 psi?

 

fully built motor and great gas very high octane, a great tuner, and a big turbo.......

 

amazing numbers, can't wait to see the pics.

just curious, what type of drivetrain is being used to get those HP to the ground

 

i have no idea ill ask and answer all ?'s i think stock but once he actually drives in the street that tranny and diff wont last a min.
Dyno doesn't stress the tranny and diff as much.

 

dang! that's too much for autocross, hardly ever will use that much, more for drag racing. definitely not street legal. im just shooting for the "beating Vettes" range, especially Z06. LOL!

 

big props but i stick with lesser power (300-600) and not much of turbo lag with that big snail. Then again.. thats alot of power.

 

hmmm id like to see some pictures

 

The same Tuner and Shop built my motor and i also purchased the SFP turbo package with the GT35R turbo.

Ill post my engine spec and turbo spec:

Engine Spec:

CP Honda F 1 CP Honda S2000 (F Series) Piston Kit
(Pistons, Pins, Rings)
Darton F Se... 1 Darton F Series Sleeves
Crower Rods F 4 Crower H Beam Rods S2000
Cometic 2.0L, DOHC VTEC 90MM MLS .030
Ferrea 1 S200 Complete Head Kit, Valves, Guides,
Springs, Retainers, Locators, Locks, & Seals
Porting 1 Portings (Race port)
Engine Beari... 1 Engine Bearing Honda (Rod & Mains)
ARP 141-4202 1 ARP Head Studs
Block Machine 1 Block Machine (Darton Sleeves) Hone
Balance & B... 1 Balance & BLue Print
Samco Hoses 2 Upper And Lower Radiator Hoses
Koyo Radiator with termostat and rad cap.
NGK Irridium Plugs

Turbo Specs:

1 gt35r/63 turbo
1 long tube sfp manifold
1 tail 38 mm waste gate
1 3" inlet tube
1 k & n 3' filter
1 braided oil line feed kit
1 braided oil return kit
1 oil filter relocation kit
1 braided oil line kit for relaction
1 24X12X3.5 core intercooler
1 sfp intercooler pipe kit
1 tail 50mm wastegate
1 hardare kit grade 8
1 stainless gasket kit
1 set rc 750cc injectors
1 set injector clips
1 complete 4 ply silicone hose kit
1 set t bolt camps kit
1 sfp heat wrap kit
1 all pipes ceramic coated
1 Complete cutum built 3" exhaust with Magnaflow muffler.

EM ( AEM EMS )