PuddyMod FULLY Built Diff, $2500 picked up, no core exchange.

So, as some of you know, I'm going turbo, and although this diff will hold up perfectly fine, I need a 3.9 gear ratio. The 4.56R is too high for the GT35R So up for sale is the PuddyMod Diff that is fully built, fully built being EVERY option that PuddyMod offers is in this diff.

Fully Cryo-Treated LSD and Gear Set $125
Richmond Gear 4.56R Gear Set
Stock Rear Cover $250
Re-Built OEM LSD $300
PuddyMod Re-Enforcement (the most expensive part, and the best part of the diff!!!!) $1100 from PuddyMod
New bearings, seals, and hardware $125
Fully de-burred and polished gears
It does NOT have the solid sleeve YET (Ben said that he would take care of this at no additional charge, just send it back out to him, and he will reinstall and check everything over) $200 (just need to send it out)
Custom painted housing
Full assembly $350 (i have all the pics)

Either way, this build cost $3200. This was Ben's own PERSONAL diff, which was re-inspected before I purchased it. A few months ago, he contacted me and wanted to buy this diff back (this was his "baby" the first diff he ever built). Which he said he would replace it with the same exact diff, but brand new, but i couldn't afford the down time. I should probably check back with Ben to see if he wants it, but I want to sell this ASAP. I'm looking to get a R200 Diff setup b/c of the lower gear ratio, so I'm willing to trade this diff for a R200 setup.

Otherwise I'm looking to get $2300 for this diff. I will also include a new quart of LE1607 (which I'm ordering tonight). So you get a savings of $900 from buying this from PuddyMod. Anyone that knows me, knows that I NEVER launch my diff. The diff has the usual 4.56 whine but only between 3-4k is when I can hear it if I'm crusing. Otherwise, I can open it up for you to take a look, but I bet my diff that there is nothing wrong with it So I'm looking to get rid of this ASAP since I already have a R200 setup ready wait for me!!!!

I have put roughly 10k miles on this diff, with the diff fluid changed every 3k miles with LE1607 with a "shot" of Lucas Oil Stabilizer (Recommended by Ben). No problems EVER with this diff.

(Ben if your reading this please let me know if you would like me to take this down)


Here is how much it would cost you from PuddyMod:

Now for the pics!!!!

CAP 1: OEM
CAP 2: COMPTECH
CAP 3: PUDDYMOD



The housing for the caps:








And finally the built diff:

Bump for a great seller! Wish I could afford this awesome piece!

OMFG i want this... damnnnnn would this fit an ap2 housing

i believe that this could fit an AP2 with just the output changed to a AP2, I could be wrong.

great differential but damn thats pricey

how much HP/TQ would this diff hold?

As of right now, the highest HP/TQ that was on this same setup (not this actual diff, it was built with the same parts) is 700whp/???tq. Ben would be able to tell you the exact numbers, but I remember that he said that the diff would have no problem holding up the 500whp I was planning on making.

Nobody wants a built diff?

i do but no $$$$ :'(

Up

payment plan1!! haha jk jk bump for you

Bump for a very nice diff. Wish I had extra cash to throw this into my setup. Exactly what I'm looking to get in the future.

PM me I will build you a 3.9 bran new PuddyMod with solid steel sleeve for this rear back




Here is the Stage 6 Mase tuned UK S2000 with a PuddyMod 4.10 rear diff
http://videos.streetfire.net/video/Mase-En...6-ST_152693.htm

This car is making 616 hp to the wheels now, using a T1R 70 mm duel exhaust. It would make 700 with higher exhaust flow


This post has been edited by S2KPUDDYDAD on Jul 12 2008, 09:00 PM

^

i know i want it

Well, I guess Ben REALLY want his diff back! His "baby" as he likes to call it. Guess the Bay Area guys are gonna lose out! Sorry guys, this diff is going back to PuddyMod. Told ya this is the first one he built! Muahahhaa...


Ben, your the man!