Can you help me find rims 18x9 & 18x10?, Post some rims that'll fit and look good

Hi and thanks if you can help me find some rims.

I want some good looking rims that are 18" x 9" and 18" x 10".
fyi the body kit is the APR performance wide-body kit so whatever you think would look good with that just post the name of the rim and/or a pic.

and don't think i'm lazy cause ive searched a lot...

Thanks,

This post has been edited by Rcdevil on Oct 30 2009, 02:09 PM

Check these out. They'd look pretty good.

Cool wheels

Hilarious...

PLEASE for the love of god show me how to do that!!!

BAM!! A bit pricey but there are alot of choices on the site. I think the Regamasters can come in that size as well and look noice.
http://www.evasivemotorsports.com/Merchant...y_Code=ADVAN-RS

Here you go.

KoukiMonsterAP1 LOL dude that was good!

the mulitspoke designs look alright but what do you guys think about Work Meister S1's on their.

the link to the body kit:

http://www.aprperformance.com/index.php?op...d=171&Itemid=44

Yah that does look good.

cool, the other options that ive looked at are:

Work Varianza T1S
AME Circlar Spec-R
Enkei RP05
Work Schwert SC4 - a little to "blingy" imo
iForged Formula Series Classic - a little to expensive

Go with the Work Varianzas, they look great imo and I haven't seen them on an S

yea they look really nice but i wonder how much they weigh.

http://www.e90post.com/forums/showthread.php?t=154989

i think i found the weight but the person isn't sure for sure.

haha funny guys. But seriously Google wont help you find wheels in the offsets he'll need for an s2000. Especially if you have to do an aggressive setup.

Better yet check search the s2ki forums for the aggressive wheels thread.

Best thing you could probably do is just contact the dealer your buying from and ask them if they will fit with the drop you want. I wish I had a better answer for you but I'm not pro with offsets and what not.

On a serious note. Do you know how much wider the wide body is? I'm running aggressive S1's in 17x8 17x9 +35 on stock body, not the most aggressive but needs a bit of camber. Just check out Offset calculator. Thats a pretty good estimate as to what you will want as far as offsets.
Hope thats more helpful than my last post

well the wide body kit allows for 9" wide rims up front and 10" wide rims in the rear.

i also e-mailed APR Performance and they said "We are using G35/350z Offsets 18x9 +20 offset front and 18x10 +18 rear"

their S2000 has a 2" drop and i want to go 1"

the wide body kit adds +45mm each fender up front and +50mm each fender in the rear.

if you want some more info on the body kit here is the link:

http://www.aprperformance.com/index.php?op...d=171&Itemid=44

and here is the link to their project s2000:

http://www.aprperformance.com/index.php?op...d=203&Itemid=44

sorry if i post too many links

If I were you I'd want to run something more aggressive than that. If you really want only 10's in the back I'd personally run a 10±0 with either a 255/40 or 265/40 or 35 tire. And a 9+5ish up front with a 245/40 or 235/40.You'd need a couple degrees neg camber but it'd look dope. Unless you don't care about aggressive and just getting as much rubber under there. In that case go with what they told you.

ya i mainly want to get as much rubber on the ground and besides that i don't want to have the negative camber cause of the tire wear that comes with it.

well besides the offset and etc. did you guys find any more rims cause i forgot to list some so give me your opinion on them, thanks.

SSR Professor SP1
SSR Werfen GT-03
SSR Vienna Courage
Rays 57 Pro
Work Xsa 02C
Work Brombacher Porsche Mesh