FS / WTT: Drag DR-31 Wheels/Tires (Work Emotion Replica)
12-11-2012, 01:00 PM
#1
Registered User
Thread Starter
Join Date: May 2011
Location: Milford, MA
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
FS / WTT: Drag DR-31 Wheels/Tires (Work Emotion Replica)
Cliffnotes:
What I have:
Good condition Drag DR-31 wheels. 17x8/9 +35/+38
What I want:
Lower offset (+25 would be as low as I'd go) 18" wheels. Staggered preferably 9" minimal rear width.
Can certainly add cash, but I'm not looking to spend $1k or more on wheels. I'll just buy another fake set for less
Or $850 shipped!
Contact:
ANY questions or offers, don't be afraid to post or PM.
______________________
Hi everyone,
I have a set of 17x8 +35 and 17x9 +38 Drag DR-31 wheels (Work Emotion replicas) wrapped in 225/45r17 (front) 255/40r17 (rear) Hankook Ventus V12 tires.
Three of them are currently white and one is gunmetal. The three tires are in good condition, I'll add a picture with tread depth soon. The tire on the gunmetal wheel is brand new, 0 miles.
No curbage, no dents, no imperfections. Centercaps are blank.
FITMENT MODS NEEDED :
My front and rear fenders are rolled and I am lowered on Tein S-Tech springs. I have no rubbing whatsoever. Note: I rolled my fronts, not flared them. I believe this is MUCH easier to do. If you come out my way, fender rolling services are available.
Even with a 255 in the back, I'm running under or just about 3* of camber in the rear. These wheels are not hard to fit at all, so don't let the offset scare you.
Rear wheels have a nice concave.
Any questions, feel free to ask
Pics (please excuse the instagram, but that's where most of the photos are found) :
*Ferrari not included
What I have:
Good condition Drag DR-31 wheels. 17x8/9 +35/+38
What I want:
Lower offset (+25 would be as low as I'd go) 18" wheels. Staggered preferably 9" minimal rear width.
Can certainly add cash, but I'm not looking to spend $1k or more on wheels. I'll just buy another fake set for less
Or $850 shipped!
Contact:
ANY questions or offers, don't be afraid to post or PM.
______________________
Hi everyone,
I have a set of 17x8 +35 and 17x9 +38 Drag DR-31 wheels (Work Emotion replicas) wrapped in 225/45r17 (front) 255/40r17 (rear) Hankook Ventus V12 tires.
Three of them are currently white and one is gunmetal. The three tires are in good condition, I'll add a picture with tread depth soon. The tire on the gunmetal wheel is brand new, 0 miles.
No curbage, no dents, no imperfections. Centercaps are blank.
FITMENT MODS NEEDED :
My front and rear fenders are rolled and I am lowered on Tein S-Tech springs. I have no rubbing whatsoever. Note: I rolled my fronts, not flared them. I believe this is MUCH easier to do. If you come out my way, fender rolling services are available.
Even with a 255 in the back, I'm running under or just about 3* of camber in the rear. These wheels are not hard to fit at all, so don't let the offset scare you.
Rear wheels have a nice concave.
Any questions, feel free to ask
Pics (please excuse the instagram, but that's where most of the photos are found) :
*Ferrari not included
Thread
Thread Starter
Forum
Replies
Last Post
ZOMG.S2K
Wheels and Tires
13
01-22-2013 03:55 AM
ZOMG.S2K
NYC Metro Stock Exchange
8
01-21-2013 08:26 AM
01spaS2K
Member S2000 Classifieds and For Sale
3
09-26-2008 05:12 AM