ed-gsxr

Hey hows going everyone? I just purchased 2004 ap2 this passed friday. It came with Viper 350HV alarm in it and everything seem to work properly until today when I try to unlock/lock the car and it does not work at all. The alarm still arm/disarm itself when I pushed the button but it just would not lock/unlock the doors. Also I notice that the led light for the alarm doesnt seem to be working. Can someone please help me. Thanks.

TPhong

Sounds like two separate issues. The LED on the viper 350HV is a plug on its own, as well as the unlock plug. I'd check to make sure something didn't just wiggle loose or take it to someone if you don't feel comfortable working on it yourself.

hrpfg2

probably wiring came loose or undone due to poor instillation.

gumbey75

check the fuse for the 451m relay for the 5 wire locks, should be purple. Sounds blown and as far as the led maybe it was disconnected somhow

TPhong

This is true also, unless they just pinned the two empty slots on the keyless harness and didn't 5 wire the locks. Regardless, check for blown fuses and unplugged harnesses to the brain of the alarm.

ed-gsxr

thanks for the reply guys. it started working out of no where. i swear it has a mind of its own

hrpfg2

definitely loose wire somewhere.

ed-gsxr

it seem like the problem only happens when its cold outside but once the weather warms up it start to work again

TPhong

Sounds like loose wiring to me. I think the weather is just coincidental.

ed-gsxr

spend most of the morning trying to figure out whats wrong with it and still no luck...checked all the wire connection, fuses, relay and everything seem to check out. but cant get that darn system to work properly first thing in the morning when i take it out