Stratocaster

After Looking hig and low, there is not a single thread with all of the e-Manage wiring info in a single thread. Some of that info is in text. So, since I have to wire a harness myself, I figured I would document it.

Please use at your own Risk!

e-Manage Main Harness

e-Manage Injector Harness (Optional part) Updated 9/2/05

e-Manage Ignition Harness (Optional part) Thanks to AusS2000

Slows2k

I'll be adding it to the rest of the E-manage FAQ

I'll be reviewing my PnP harness to verify
Thanks

AusS2000

I'm not sure if it matters or not but I think I wired Injector Ch 1 to Injector 1 and so on.

Stratocaster

Updated. Please review if you can. Feedback welcome.

Thanks

Slows2k

Just went over all the connections on my PnP harness. All match up to the Diagrams.

folex187

Did you guys get your harnesses from vtecfrog? I have been trying to contact them in regards to a harness for the ultimate and no one has gotten back to me.

PS-
I found a place selling the Ultimate Emanage for $500 shipped if anyone is interested.

Slows2k

I bought mine used. It's VTECfrog harness.

Stratocaster

Just order a straight-through harness and add the e-manage Ultimate harness your self. That is why I wrote these. I have a harness that I got used. I had a number of issues with it as it is fragile. So I had to make my own. That is what drove me to write this thread.

Thanks for the Ultimate Emanage for $500 offer. I am going EMS once I am done with this e-Manage project.

folex187

Making my own would be my number one choice as I am not sure how long I would like my extension cable. Care to share where you purchased the male and female plugs?

Stratocaster

I have a Vtech frog harness that is the donor for connector A and for the long connector. I bought a used OEM harness and ti was the donnor for connecor B and C. I plan of sealing the long connector in plastic once I am done to help it from breaking.

I can buy the connectors in bulk (100s at a time or each) but I don't want to make these all the time.