Lean a/f at idle after 1/4 mile run
#21
Nice, should be an easy job to wire it in to one of the analog inputs or maybe the digital one if the AEM has one of those outputs.
I'm using a PLX wideband with the digital input and it's been working great so far.
I'm using a PLX wideband with the digital input and it's been working great so far.
#22
Update.... I've been working with my tuner for the past couple weeks. I wired my aem wideband to the eld input on the kpro ecu to datalog my a/f. And sure enough my tuner said something was wrong and he didn't know what happened. He immediately sent me a revised calibration. Now the a/f ratios were perfect at 12.9-13:1 across the entire rpm range at wot. He then told me to wire the wideband into the analog input so I could run closed loop off the wideband. I did this and he sent me another calibration with all the changes to do so. I sent him a datalog and he sent me another revised calibration and now the car runs perfect... wish I knew what happened with the tune I guess it will remain a mystery...
Thread
Thread Starter
Forum
Replies
Last Post
jasonngork
S2000 Forced Induction
1
03-21-2009 07:17 PM