Anyone using a 255 R888R on a 10" wheel?
#1
Member
Thread Starter
Anyone using a 255 R888R on a 10" wheel?
Don't want to bring up the 9" vs 10" debate, but want to check the R888R isnt overstretched on 10" (Advan / Rays etc)
It's showing a 260mm width.
It's showing a 260mm width.
#6
This is a side view of my 255 on a17x10" CE28[img]webkit-fake-url://e37f7340-c1b8-4be5-9d7a-b34a7685804e/imagejpeg[/img]
Last edited by BradtheMachine; 12-22-2016 at 08:35 PM.
Trending Topics
#8
What about a 245/45/17 NT-01 on a 10" wheel? too much stretch, or just at the limit and doable?
#9
#10
^ Yes, i'm very well aware of running 255s on a 10" wide rim - it's the best stretch for a 255 on 17"s; however, I'm trying to setup the car to a specific point total for ruling/classing purposes.
I figured a 245/45 with a slightly taller side wall and the fact that NT-01s run wider than street tires should allow it to stretch decently well on a 10" rim and not negatively affect performance.
I figured a 245/45 with a slightly taller side wall and the fact that NT-01s run wider than street tires should allow it to stretch decently well on a 10" rim and not negatively affect performance.