EvasiveMotorsports

Hey S2ki,

Just wanted to share with you guys the new fenders we've been working on.

Evasive has been race prepping and working on S2000's for over 10 years!
With the knowledge gained from experience, Evasive has released wide fenders for the S2000 with built in Louver's.

Features:

Built in louvers reduce lift and create downforce by relieving unwanted pressure differentials.
Pressure differentials can occur anywhere that a fluid flow is allowed to enter an area that is difficult to exit.
Pressure differential cam contribute to lift or reduces downforce.
*** Note: Proper ducting and modifications needed to achieve full benefits of louvers.
Fenders comes as a pair - (Left and Right).
Widen's fenders by 30mm or 1.18 inches.
Fender lines stay clean to not disrupt with Honda's design and form and are straight and perfect just like the factory.
Reduced weight - Lightweight construction (4.90 lbs per fender). Factory OEM Fenders weigh 11.24 lbs
Saves a total of 12lbs from factory S2000 fenders.
Factory plastic fender liner is compatible.


Available in FRP (Fiberglass) or CFRP (Carbon Fiber) Louver Only
*** Comes unpainted

MSRP
FRP $999
CF $1199








-----------------------------------------------------------------------------------------------------------------------------------------



Payment Information

Paypal
Paypal Address – Sales@Evasivemotorsports.com
Memo - #1 What you want to order #2 S2ki Member #3 Telephone number
We will only take confirmed paypal accounts with verified shipping addresses

Credit Card
Please give me a call at the office (626.336.3400) for any credit card transaction. The billing and shipping address has to be the same unless your shipping address is an alternative address filed with your credit card company

International
If you are an international customers we only take wire transfer as a form of payment. Please PM me for wire transfer information

9.0% California tax applies if you are in California.

Contact Information

Evasive Motorsports - 626.336.3400 - joshua@Evasivemotorsports.com
Evasive Motorsports Website
Evasive Motorsports Blog

trunger

hows the fitment with a 18x10+35 285/30 tire?
would you recommend getting the voltex over fenders on top?
or its not needed?

EvasiveMotorsports

would recommend the over fenders.

EvasiveMotorsports

Bump!

Tehk

What is the carbon option? Just a carbon louver the rest is frp? Or will it be all carbon finish so I can skip paint

EvasiveMotorsports

carbon louver only. you will need to paint the rest and clear the carbon as well.

MB

Nice!

What size / offset 17" front using a 255 tyre would work well with these? I have 2.5 deg camber.

9" +40?

EvasiveMotorsports

9+40 would work.

you can do 17x10 all around. 44 offset. still have room for a little lower offset.

imstimpy

The fenders look great! What is the wheel/offset and tire size depicted in the photos?

obriener2054

Is there anyway these can be shipped to Europe (Ireland) for silly low shipping price
??