NewTypeNA

Really? In the Front? I am trying to get more camber in the front due to being non staggered and thought that is about what the stock control arms max out at. What would you say is bent?

EvasiveMotorsports

assuming you are lowered from stock correct? you can definitely get around -2.5 degree - -3degree no problem. hard to really say what is bent. could be the hub, lower control arm, upper control arm, subframe .. etc. really hard to say what it is.

chrisaltima

Depending on height you should be able to easily get 2.0-2.5 camber on a stock set up. I personally run 2.0 now and not close to max out. This is at a solid height, almost 2 finger tire gap.

//steve\\

You'll only get -2.5-3 if you're pretty low. If you're closer to stock height I think your range is normal.

King Tut

I'd listen to this guy. He knows about that //slammed\\ life.

FRSKLLR

Lol i'm completely stock suspension and height and I have -2.5 front and -3 rear

EvasiveMotorsports

In stock Ready to Ship!

ThatSlowKid

im curious to see how much camber this adds over maxed out stock bolts. Any before / after alignment sheets by any chance?

av8ter

I was able to get over an additional degree at my ride height(not low at all) putting camber 3.9-4(was only able to get 2.7 prior).

These are back in stock, just picked up a spare set for myself.

EvasiveMotorsports

In stock ready to ship!