weatyGT

Is this a yes or a no?! Or are you suggesting we hit the factory by night fall.... in some kryrpic tip off kind of way... Hmmmmm

Tegiwa Imports

Is this a yes or a no?! Or are you suggesting we hit the factory by night fall.... in some kryrpic tip off kind of way... Hmmmmm
[/quote]

Its an 'I don't really know as I've never seen PB up close, but its quite possible'

Tegiwa Imports

1. a.roden (CTRO) - PAINTED ORANGE - FN2 - SLOTTED
2.
3.

Tegiwa Imports

FYI

Each disc including the aluminium bell is 8.2kg (DRILLED version)

Tegiwa Imports

Here are the templates, so that people can measure for wheel clearance.

The pink section is the 'bell', so if you take the measurement from the bell to the outer caliper that is the amount of clearance you'll require. So in the EP3's case you'll need to have 36mm (+2mm extra) between the wheel mounting face and the back of the spokes at 121.06mm to 164.56mm from the wheel centre.

EP3


DC5


FN2


S2000

Tegiwa Imports

1. a.roden (CTRO) - PAINTED ORANGE - FN2 - SLOTTED
2. Wizzlefn2 (Civinfo) - ANODISED RED - FN2 - SLOTTED
3. TheLegMan (Civinfo) - PAINTED RED - FN2 - SLOTTED

Tegiwa Imports

1. a.roden (CTRO) - PAINTED ORANGE - FN2 - SLOTTED
2. Wizzlefn2 (Civinfo) - ANODISED RED - FN2 - SLOTTED
3. TheLegMan (Civinfo) - PAINTED RED - FN2 - SLOTTED
4. jonathan power (Civinfo) - PAINTED RED - FN2 - SLOTTED

s2konroids

So can we confirm they fit behind stock oem 17s, and retain handbrake usage.

Tegiwa Imports

This is only for fronts, if we had an S2000 then I'd be able to check but we don't.

weatyGT

So the company supplying the brake kit for an s2000 doesnt know if they fit the cars OE wheels? Not sure thats a good thing you know. :-(