madneo

Hey guys, i'v been searching like a maniac and can't find out the s2k's perfect offset

I'm about to purchase this a set of BBS LM's in this size:

18x8 +35 Front 114.3*5
18x9 +35 Rear 114.3*5

OR

18x8.5 +38 Front 114.3*5
18x9.5 +38 Rear 114.3*5

What i want to know is; What is the s2k's perfect offset? i mean i want to have a perfect flush look, Is 38 too big or too small? thanks guys

madneo

damn yes they are, i was actually looking at your thread. No fender roll or rubbing? its extremely agressive.

sillyboybmxer

even though i love aggressive offsets.....bbs made the perfect s2000 offset,...its the "Standard" s2k fitment from bbs

spitvenom

I guess mine is too aggresive??

JK good luck man LMs are sick no matter what!!

madneo

^ What size are your LM's ?? and what offset spitvenom??

spitvenom

17x9.5 and 17x10.5 36ET and 42ET

f00dstamps

Wow. That's aggressive. I thought that my 18x8 et40 and 18x9 et42's were going to give me some trouble. I'm hoping to get away with this setup with some narrow 245's in the rear and -2 degrees or less of camber. How much camber are you running, how low are you, and how much do you rub?

madneo

18x8.5 +38 Front 114.3*5
18x9.5 +38 Rear 114.3*5

Can i get away with that? advice please guys

jman77v309

wooow beautiful..

spitvenom

Thanks, that setup will not give u much trouble it will be fine without mods unless car is pretty dropped. then minor fender rolling and 225-245 should do it!! good luck.

Im running about -2 and -3 camber and im pretty damn low hahha I have 225-255 with rt615 azenis that are a wide tire and I dont rub at all even if im pushing it hard