shammo31

OK just got my mugen spoiler today,

But was just wondering how to install this, as i only see two bolts on the wing, one either side.

I current have the OEM wing, which has four bolts two either side. and was thinking, does it use the same holes as the oem rear wing?

If so, how will two bolts on the mugen wing even keep it as steady as the oem wing which has two bolts either side?

Please help. would like to get this fitted asap

WinFreak

It does use the same holes as the oem wing, the back ones iirc

If I were you I'd get some decent 3M double sided tape (VHB preferably) and use that plus the 2 bolts, it'll go nowhere

The Loon

Agreed. You need to put some 3M tape on the underside of the stands.

The Loon

http://handa-accessories.com/S2000/04s2kwing.pdf

The procedure should be the same as the OEM wing. Instructions are in the link above

jimmyb1978

If you search 'oem low to high spoiler' it will come up with my link on how I fitted my high level spoiler. If it uses the same jokes the principle will be the same

Edit link
https://www.s2ki.com/s2000/topic/105...level-spoiler/