K&N Install Help
#1
Registered User
Thread Starter
Join Date: Mar 2012
Location: London
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
K&N Install Help
So I finally got around to installing my K&N FIPK onto the MY08 this morning. I've ended up with a rubber hose not connected to anything and a metal connector that the hardline hose was connected to previously. I've double checked the printed instructions and looked at various photos online but I can't figure out where I've gone wrong. Should they actually just be connected to each-other? Any help would be much appreciated!
#3
Registered User
Thread Starter
Join Date: Mar 2012
Location: London
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered User
Thread Starter
Join Date: Mar 2012
Location: London
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
#6
Those are vacuum lines. There should be 2 of them. Can't remember where they originate, but they both end up in that area under the fuel rail. Check your install instructions again.
Thread
Thread Starter
Forum
Replies
Last Post
kush only
California - Southern California S2000 Owners
1
04-05-2003 12:31 PM