UK & Ireland S2000 Community Discussions related to the S2000, its ownership and enthusiasm for it in the UK and Ireland. Including FAQs, and technical questions.

cooling question

Thread Tools
 
Old 09-26-2016, 09:08 AM
  #1  
Registered User

Thread Starter
 
Rich007's Avatar
 
Join Date: Jul 2014
Location: Shropshire
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default cooling question

Will the radiator from a pre-facelift fit a facelift car? I have 2006 drive by wire throttle if that makes any difference? Cheers
Old 09-26-2016, 01:00 PM
  #2  

 
Tim S's Avatar
 
Join Date: Mar 2011
Location: West Sussex
Posts: 588
Received 4 Likes on 4 Posts
Default

I think the coolant temp sensors are different sizes between early and late as aftermarket rads have holes for both. I don't know when they changed.
Old 09-27-2016, 01:07 AM
  #3  
Registered User

Thread Starter
 
Rich007's Avatar
 
Join Date: Jul 2014
Location: Shropshire
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks Tim - the reason I ask is because I have seen this on e-bay

http://www.ebay.co.uk/itm/BRAND-NEW-...3D201212743467

The compatibility chart shows it does fit a 2006 year but when you fill in the check vehicle details it says 'non compatible'.

The threaded brass connector (in the bottom left side) also visibly looks smaller than the temperature sensor size.

Has anyone had experience of these radiators? Any feedback in terms of quality would be appreciated.
Old 09-30-2016, 09:50 AM
  #4  

 
UK Paul's Avatar
 
Join Date: Oct 2000
Location: Newcastle Upon Tyne
Posts: 3,548
Received 7 Likes on 7 Posts
Default

Someone is selling a OEM 2007 facelift one on here...like new...but it wouldn't fit my 2002...
Old 09-30-2016, 04:19 PM
  #5  

 
Chuck S's Avatar
 
Join Date: Jul 2014
Location: Chesterfield VA
Posts: 12,530
Received 1,132 Likes on 995 Posts
Default

A buddy and I compared radiators a year ago. His '02 and my '06 radiator have identical Denso part numbers -- on the radiator itself, they the same radiator. Honda part numbers differ only in the last three digits. The '06 and '07 have the same Honda part number.

Either his '02 had a later radiator or Honda has two different part numbers for the same radiator. Regardless the same part number as my '06 (and the '07) is in his '02 and nothing looks cobbled together.

-- Chuck
Old 09-30-2016, 07:03 PM
  #6  

 
haga888's Avatar
 
Join Date: Apr 2015
Posts: 1,269
Received 14 Likes on 14 Posts
Default

The rad may be the same but the fan switch is smaller on the DBW AP2. You have to use your 06+ fan switch or it'll throw a CEL and you can't just wire in an AP1 fan switch. You can get an adapter to fit the switch though. Not sure what the sizes are. My Mishimoto came with the adapter.
Old 10-02-2016, 10:43 PM
  #7  
Registered User

Thread Starter
 
Rich007's Avatar
 
Join Date: Jul 2014
Location: Shropshire
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the replies. Really useful as usual with this forum. I have bought separate fans (but didn't appreciate there were different connectors) this should be okay because I have the original fans so I assume I can just butcher the old connectors and solder onto the replacement fans.

I have messaged the seller of the 2007 rad and asked if he would split the rad and fans but he hasn't responded. For the price I am thinking of going down the new after market route unless I can find I good second hand one.

Cheers Rich.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
iAhmad
S2000 Modifications and Parts
13
08-01-2013 09:55 AM
s2sik
S2000 Under The Hood
1
09-26-2010 07:39 PM
donaldmejr
S2000 Modifications and Parts
3
05-03-2010 11:32 AM
KewlWhip
S2000 Modifications and Parts
1
04-10-2008 08:06 PM
WashabiS2K
S2000 Forced Induction
12
07-05-2007 05:26 AM



Quick Reply: cooling question



All times are GMT -8. The time now is 05:55 PM.