JoeyBalls *Official GT35r Build*
#1
Registered User
Thread Starter
JoeyBalls *Official GT35r Build*
Well guys I am getting married this weekend so I figured while I am away on my Honeymoon I will drop the car off to have some work done. Jeff (Minitoyota) is doing all the work and when the time comes I will have my real Wife tuned by Jeff Evans . Anyway while I am away I will have the 3mm Headgasket installed, Battery Fusebox Relocated and have some headwork done. (New AP2 OEM Valves/Retainers/Springs, the head milled, lapping the valves and have the head hot tanked before it goes back in.
I was Greddy Turbo'd for around a year and half (20,000 miles or so) and that was a lot of fun but I was always wanting more power and one ride in SoulCoughing's car was all it took for me to sell the Greddy and start this mess . Anyway I will be adding parts as I go along but I am going to give a COMPLETE listing of EVERYTHING I bought and did to the car so if people want to know the true cost of going turbo they can see how it really adds up $$$$$$$$$$
Anyway I went with the PFAB Twinscroll Manifold, which will be pushing air through a Garrett GT35R 1.06 divided housing. I am hoping to use my Water Meth Injection as well and I am hoping for 550RWHP , but whatever it makes it makes.
I will add info as I go along but hoping to get it on the dyno mid-February. I have a good amount of stuff ordered the only big thing I have yet to order is the Turbo itself, won't take long to get here when I do order. I will post pics of the manifold early NOV when it gets here
If you see something missing, speak up so I can order it
--SuperTech Valves
--ELT divided manifold t4
--AEM Water/Meth Injection
--CC Clutch & Flywheel
--3" downpipe
--Dual dumptubes
--TiAL 38 MVS wastegates (12lb spring)
--Garrett GT35R (ported Shroud) 1.06 divided
--HKS SSQ BOV
--AEM EMS Series 2 ECU
--Intercooler
--IC Charge Piping
--Hardware Kit/Oil Fittings
--Exhaust Cut-out (QTP)
--ID 1000cc Inc
--OEM Head Bolts
--IP 3MM Head Gasket
--AEM Boost Control Solenoid
--AEM 3 Bar Map Sensor
--Oil Restrictor
--Oil feed/ return kit
--Ball bearing Coolant kit
--Swaintech Coating
--Gauge Pillar
--Greddy Oil Catch Can
--ARP Exhaust Studs
--Samco Hoses
--Koyo Radiator
--Misc (heat wrap etc)
--Headwork/Bat-Fusebox Relocation
--Invidia V3
--Air/Fuel Gauge--Oil Pressure gauge--Boost gauge--Oil Temp Gauge
--EGR Block off plate
I was Greddy Turbo'd for around a year and half (20,000 miles or so) and that was a lot of fun but I was always wanting more power and one ride in SoulCoughing's car was all it took for me to sell the Greddy and start this mess . Anyway I will be adding parts as I go along but I am going to give a COMPLETE listing of EVERYTHING I bought and did to the car so if people want to know the true cost of going turbo they can see how it really adds up $$$$$$$$$$
Anyway I went with the PFAB Twinscroll Manifold, which will be pushing air through a Garrett GT35R 1.06 divided housing. I am hoping to use my Water Meth Injection as well and I am hoping for 550RWHP , but whatever it makes it makes.
I will add info as I go along but hoping to get it on the dyno mid-February. I have a good amount of stuff ordered the only big thing I have yet to order is the Turbo itself, won't take long to get here when I do order. I will post pics of the manifold early NOV when it gets here
If you see something missing, speak up so I can order it
--SuperTech Valves
--ELT divided manifold t4
--AEM Water/Meth Injection
--CC Clutch & Flywheel
--3" downpipe
--Dual dumptubes
--TiAL 38 MVS wastegates (12lb spring)
--Garrett GT35R (ported Shroud) 1.06 divided
--HKS SSQ BOV
--AEM EMS Series 2 ECU
--Intercooler
--IC Charge Piping
--Hardware Kit/Oil Fittings
--Exhaust Cut-out (QTP)
--ID 1000cc Inc
--OEM Head Bolts
--IP 3MM Head Gasket
--AEM Boost Control Solenoid
--AEM 3 Bar Map Sensor
--Oil Restrictor
--Oil feed/ return kit
--Ball bearing Coolant kit
--Swaintech Coating
--Gauge Pillar
--Greddy Oil Catch Can
--ARP Exhaust Studs
--Samco Hoses
--Koyo Radiator
--Misc (heat wrap etc)
--Headwork/Bat-Fusebox Relocation
--Invidia V3
--Air/Fuel Gauge--Oil Pressure gauge--Boost gauge--Oil Temp Gauge
--EGR Block off plate
#4
Registered User
Thread Starter
Originally Posted by Revenge,Oct 14 2009, 05:09 PM
Can't wait, this should turn out real nice.
#6
Originally Posted by JoeyBalls,Oct 15 2009, 11:04 AM
--OEM Head Studs
#7
Registered User
Thread Starter
Originally Posted by s2000isu,Oct 14 2009, 05:14 PM
congrats joey I am getting married this weekend too. Maybe we are going on the same honeymoon haha.
AusS2000-Fixed it thanks