JoeyBalls

Well guys I am getting married this weekend so I figured while I am away on my Honeymoon I will drop the car off to have some work done. Jeff (Minitoyota) is doing all the work and when the time comes I will have my real Wife tuned by Jeff Evans . Anyway while I am away I will have the 3mm Headgasket installed, Battery Fusebox Relocated and have some headwork done. (New AP2 OEM Valves/Retainers/Springs, the head milled, lapping the valves and have the head hot tanked before it goes back in.

I was Greddy Turbo'd for around a year and half (20,000 miles or so) and that was a lot of fun but I was always wanting more power and one ride in SoulCoughing's car was all it took for me to sell the Greddy and start this mess . Anyway I will be adding parts as I go along but I am going to give a COMPLETE listing of EVERYTHING I bought and did to the car so if people want to know the true cost of going turbo they can see how it really adds up $$$$$$$$$$

Anyway I went with the PFAB Twinscroll Manifold, which will be pushing air through a Garrett GT35R 1.06 divided housing. I am hoping to use my Water Meth Injection as well and I am hoping for 550RWHP , but whatever it makes it makes.

I will add info as I go along but hoping to get it on the dyno mid-February. I have a good amount of stuff ordered the only big thing I have yet to order is the Turbo itself, won't take long to get here when I do order. I will post pics of the manifold early NOV when it gets here

If you see something missing, speak up so I can order it


--SuperTech Valves
--ELT divided manifold t4
--AEM Water/Meth Injection
--CC Clutch & Flywheel
--3" downpipe
--Dual dumptubes
--TiAL 38 MVS wastegates (12lb spring)
--Garrett GT35R (ported Shroud) 1.06 divided
--HKS SSQ BOV
--AEM EMS Series 2 ECU
--Intercooler
--IC Charge Piping
--Hardware Kit/Oil Fittings
--Exhaust Cut-out (QTP)
--ID 1000cc Inc
--OEM Head Bolts
--IP 3MM Head Gasket
--AEM Boost Control Solenoid
--AEM 3 Bar Map Sensor
--Oil Restrictor
--Oil feed/ return kit
--Ball bearing Coolant kit
--Swaintech Coating
--Gauge Pillar
--Greddy Oil Catch Can
--ARP Exhaust Studs
--Samco Hoses
--Koyo Radiator
--Misc (heat wrap etc)
--Headwork/Bat-Fusebox Relocation
--Invidia V3
--Air/Fuel Gauge--Oil Pressure gauge--Boost gauge--Oil Temp Gauge
--EGR Block off plate

Vinsfeld

woohoo first post!

Revenge

Can't wait, this should turn out real nice.

JoeyBalls

I hope so, only thing I am kinda bummed about is I don't think Evans is a big fan of METH injection so I am not sure if he wants to tune with it, I hope so but whatever he says goes , I trust him.

s2000isu

congrats joey I am getting married this weekend too. Maybe we are going on the same honeymoon haha.

AusS2000

Small thing, but there are no 'OEM head studs'. OEM are bolts, aftermarket (ARP or AEBS) are studs.

JoeyBalls

haha Im off to Hawaii..................btw the whole Northeast is going to be a wet mess this weekend , sucks

AusS2000-Fixed it thanks

s2000isu

Nice im off to bermuda on a cruise should be interesting weather. We pick good dates huh?

MADjdm

This thread should be full of WIN. Enjoy your honeymoon joey

JoeyBalls

Thanks, don't tell my soon to be wife, but I think Im more excited about this set-up than the wedding