toniotran

Hi All,

I apparently have an oil leak that seems to be coming from one of the bolts located on top of the vtec solenoid. To be precise there are 3 bolts that are mounted on top of the vtec solenoid and it is the 1 pointed outward in the same direction as the vtec pressure switch. After unscrewing all 3 bolts and removing the top cover of the vtec solenoid there is a rubber gasket, I went to the dealership assuming that I would be able to order it but the only gasket available is the one with the filter . If any knows where I can order the gasket as shown in the diagram below or what I could possibly do to stop the oil leak please chime in.

TIA,
Tony

s2ke5

I had the same exact problem and ended up ordering the gasket with filter from the Honda dealership. I couldn't find just the gasket either.

my2ks2k

just buy the kit, it's not expensive

toniotran

This one?



The one that I need is the "upper" gasket like the one shown in the 1st pic and not the one w/ the filter that goes between the vtec solenoid and the block, and from what it looks like I wasn't able to find the part number for it

similar to this:

fri3dric3boi

sorry to bump but does anyone know the part number for the top gasket?

jonathanyip343

I have the same question. Who know the part number ?

Billman250

Not available. Need to buy a VTEC valve to get it.

s2000ellier

36172-P08-015 017 001 GASKET, SOLENOID BASE 7.80 5.46


I just replaced one on my 97 prelude, i'd bet they're interchangeable

nissanfanatic

15825-PCX-015

http://www.hondaauto...+VIN+Number+---

Item 14

SgtB

That's a different gasket. The solinoid assembly has two halves and there is a gasket that isn't listed for the S. It's number 17 in the link I posted, and looks exactly like the one the OP posted.