Oregon S2000 Owners The Club forum for S2000 Owners in Oregon and SW Washington.

PASSENGER WINDOW WONT GO UP!

Old 04-22-2012, 11:54 PM
  #1  
Registered User
Thread Starter
 
NAs2kCR's Avatar
 
Join Date: Mar 2011
Location: Beaverton
Posts: 430
Likes: 0
Received 0 Likes on 0 Posts
Default PASSENGER WINDOW WONT GO UP!

So my car is now On the fritz! The passenger window won't roll up or down. I have replaced the driver and passenger switch 2 times per side and it's defiantly not a faulty switch.

So next thing I did was pull the door panel off and put power manually to the switch, the window went up and down. So I know the motors and switches are ok, what else could it be? I hear the relay clicking under the dash. Could it be a faulty relay? Is my wiring toast somewhere? I pulled the dash out and chased anything and everything. I'm to the point of wiring a direct harness from my switch and window to its own power source, just so I don't have to deal with this shit anymore.

Any help would make my life a lot easier.
Old 04-23-2012, 12:02 AM
  #2  
Registered User

 
ghettocrxsi's Avatar
 
Join Date: Oct 2008
Location: Portland oregon
Posts: 1,637
Likes: 0
Received 1 Like on 1 Post
Default

Dumb question but do you have the window lock on?
The following users liked this post:
Ndnola (10-13-2022)
Old 04-23-2012, 12:05 AM
  #3  
Registered User
Thread Starter
 
NAs2kCR's Avatar
 
Join Date: Mar 2011
Location: Beaverton
Posts: 430
Likes: 0
Received 0 Likes on 0 Posts
Default

And I checked fuses
Old 04-23-2012, 12:06 AM
  #4  
Registered User
Thread Starter
 
NAs2kCR's Avatar
 
Join Date: Mar 2011
Location: Beaverton
Posts: 430
Likes: 0
Received 0 Likes on 0 Posts
Default

Window lock is off, I'm slow, but not that slow.
Old 04-23-2012, 09:45 PM
  #5  
Registered User
 
9MMSWORD's Avatar
 
Join Date: Jan 2011
Location: Beaverton, OR
Posts: 110
Likes: 0
Received 0 Likes on 0 Posts
Default

check the under dash fuse box fuses 8, 17 and 18 also in the harness side of the master switch check the blu/wht and blu/red wires for contact and that they are in the plug correctly, check the plug to the passenger window switch for the same thing, also check under the left kick panel the c502 plugin( plug closest to the silver metal box) that has all the passenger and convertible wires through it.
Old 04-25-2012, 11:10 AM
  #6  
Registered User
Thread Starter
 
NAs2kCR's Avatar
 
Join Date: Mar 2011
Location: Beaverton
Posts: 430
Likes: 0
Received 0 Likes on 0 Posts
Default

Checked all of it. It's all solid. Anyone have a wiring diagram I can use so I can just re wire it?
Old 04-25-2012, 01:02 PM
  #7  
Banned
 
HondaRehab's Avatar
 
Join Date: Feb 2009
Posts: 1,196
Likes: 0
Received 1 Like on 1 Post
Default

Good luck man.

I can't really offer any advice but electrical problems are my least favorite thing to trouble shoot.
Old 04-25-2012, 09:29 PM
  #8  
Registered User
 
9MMSWORD's Avatar
 
Join Date: Jan 2011
Location: Beaverton, OR
Posts: 110
Likes: 0
Received 0 Likes on 0 Posts
Default

don't rewire it, theres a fault somewhere you just need to find it. Ill try to get diagrams for you and diag instructions
Old 04-25-2012, 09:52 PM
  #9  
Registered User
 
9MMSWORD's Avatar
 
Join Date: Jan 2011
Location: Beaverton, OR
Posts: 110
Likes: 0
Received 0 Likes on 0 Posts
Default

here
1. remove the master switch but leave it plugged in

you'll need a multi meter and a simple ground wire.

Name:  Masterswitchtest1.jpg
Views: 6322
Size:  102.1 KB

Name:  Masterswitchtest2.jpg
Views: 6854
Size:  92.2 KB

complete this, and let me know.
Old 04-26-2012, 12:03 AM
  #10  
Registered User
Thread Starter
 
NAs2kCR's Avatar
 
Join Date: Mar 2011
Location: Beaverton
Posts: 430
Likes: 0
Received 0 Likes on 0 Posts
Default

^^ you rock! I was trying to find this. Was about to just download the Manuel for 20$. I appreciate the help. I'll keep you posted.

Quick Reply: PASSENGER WINDOW WONT GO UP!



All times are GMT -8. The time now is 06:29 PM.