BalladeSports.com
02-07-2014, 09:39 AM
#11
Former Sponsor
Thread Starter
Hi everyone,
I'd like to introduce a new product that we now carry.
Ballade Sports now has a cost effective alternative to the commonly failed Honda S2000 Knock Sensor. We are proud to offer Ballade Sports new replacement Knock Sensor for Honda S2000 models 2000-05. Part # 30530-PCX-003 reference.
Over time the heat from the F20C/F22C has caused the plastic housing around the knock sensor to become frail and brittle. Just the slightest touch to the sensor has caused cracks and failures to the electrical connection within the sensor.
Until now the only alternative has been to replace the sensor with a Honda Factory Unit, retailing $180.77 MSRP. NO MORE!! SALE PRICE $59.99!
Ballade Sports Honda S2000 Knock Sensor Assy replaces the Honda Factory Unit with a low low price!
Fits Honda S2000 models 2000- 05 ONLY!
http://www.balladesports.com/product...-30530-pcx-003
I'd like to introduce a new product that we now carry.
Ballade Sports now has a cost effective alternative to the commonly failed Honda S2000 Knock Sensor. We are proud to offer Ballade Sports new replacement Knock Sensor for Honda S2000 models 2000-05. Part # 30530-PCX-003 reference.
Over time the heat from the F20C/F22C has caused the plastic housing around the knock sensor to become frail and brittle. Just the slightest touch to the sensor has caused cracks and failures to the electrical connection within the sensor.
Until now the only alternative has been to replace the sensor with a Honda Factory Unit, retailing $180.77 MSRP. NO MORE!! SALE PRICE $59.99!
Ballade Sports Honda S2000 Knock Sensor Assy replaces the Honda Factory Unit with a low low price!
Fits Honda S2000 models 2000- 05 ONLY!
http://www.balladesports.com/product...-30530-pcx-003
03-04-2014, 04:26 PM
#14
Former Sponsor
Thread Starter
Hi Everyone,
We are proud to present the Ballade Sports 18 pc Spherical Uni-Ball Suspension Bushing Kit for the Honda S2000. Ballade Sports strives for excellence in quality engineering and high performance; therefore we have designed a virtually maintenance free suspension bushing kit using the HIGHEST quality "American Made" Spherical Uni-Ball joints for all the Lower Control Arm pivot points along with solid straight Upper Control Arm Bronze bushings. This kit is a must for road race enthusiast looking eliminate alignment deflection and slop from rubber control arm bushings. Until now, no other manufacturer has produced a Spherical kit for the S2000 that is protected from dust and debris. Ballade Sports Uni-Ball Cups use a rubber O ring to keep out contaminants, keeping the Spherical joint clean while on the road. The Upper control arm bushings are made out of Steel/Bronze/Aluminum construction that is press fit and notched with Inner O rings on both ends keeping the bushing maintenance free.
The Front LCA rubber Compliance bushing is replaced with our Large Caster Spherical Uni-ball along with the matching Camber Uni-ball.
The Rear LCA and Toe Arm rubber bushings are also replaced with Uni-ball joints.
Please Note: The Uni-ball joint used for the rear Toe Arm also does double duty as an Anti-Bumpsteer kit to reduce snap over steer.
The Front & Rear Upper Control Arm bushings use our Bronze Straight Bushings replacing the factory rubber.
Due to the lack of alignment advantage, Front and Rear shock bushings are excluded from the use of solid bushings. This allows the user to retain some comfort in suspension travel.
http://www.balladesports.com/product...on-bushing-kit
RL]
We are proud to present the Ballade Sports 18 pc Spherical Uni-Ball Suspension Bushing Kit for the Honda S2000. Ballade Sports strives for excellence in quality engineering and high performance; therefore we have designed a virtually maintenance free suspension bushing kit using the HIGHEST quality "American Made" Spherical Uni-Ball joints for all the Lower Control Arm pivot points along with solid straight Upper Control Arm Bronze bushings. This kit is a must for road race enthusiast looking eliminate alignment deflection and slop from rubber control arm bushings. Until now, no other manufacturer has produced a Spherical kit for the S2000 that is protected from dust and debris. Ballade Sports Uni-Ball Cups use a rubber O ring to keep out contaminants, keeping the Spherical joint clean while on the road. The Upper control arm bushings are made out of Steel/Bronze/Aluminum construction that is press fit and notched with Inner O rings on both ends keeping the bushing maintenance free.
The Front LCA rubber Compliance bushing is replaced with our Large Caster Spherical Uni-ball along with the matching Camber Uni-ball.
The Rear LCA and Toe Arm rubber bushings are also replaced with Uni-ball joints.
Please Note: The Uni-ball joint used for the rear Toe Arm also does double duty as an Anti-Bumpsteer kit to reduce snap over steer.
The Front & Rear Upper Control Arm bushings use our Bronze Straight Bushings replacing the factory rubber.
Due to the lack of alignment advantage, Front and Rear shock bushings are excluded from the use of solid bushings. This allows the user to retain some comfort in suspension travel.
http://www.balladesports.com/product...on-bushing-kit
RL]
04-09-2014, 12:47 PM
#15
Former Sponsor
Thread Starter
Ballade Sports Honda S2000 5 Step 4-2-1 Stainless Steel Exhaust Manifold.
In Stock and ready to ship. $899.99 + Shipping.
Product Description
Fits all S2000 model years.
Ballade Sports S2000 header is a Tri Y 4-2-1 manifold that features 5 step size piping to minimize reversion. Each step in size acts as an anti-reversion step reducing back up of the exhaust fumes. Primary runners are 1.75 inch, to 1.875 inch, to 2.00 inch, to 2.25 inch, to 2.5 inch merge collector. Stepping the header pipe sizes helps direct exhaust flow increasing scavenging along with the high heat treated ceramic coat to reduce exhaust temperature, thus allowing the exhaust flow to exit faster. Wheel horsepower gains approximately 10whp mid-range dependent on application setup.
In Stock and ready to ship. $899.99 + Shipping.
Product Description
Fits all S2000 model years.
Ballade Sports S2000 header is a Tri Y 4-2-1 manifold that features 5 step size piping to minimize reversion. Each step in size acts as an anti-reversion step reducing back up of the exhaust fumes. Primary runners are 1.75 inch, to 1.875 inch, to 2.00 inch, to 2.25 inch, to 2.5 inch merge collector. Stepping the header pipe sizes helps direct exhaust flow increasing scavenging along with the high heat treated ceramic coat to reduce exhaust temperature, thus allowing the exhaust flow to exit faster. Wheel horsepower gains approximately 10whp mid-range dependent on application setup.
Thread
Thread Starter
Forum
Replies
Last Post