When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
its the same valve cover as before.. actually I would like some input on who ever is still reading this thead. This is the lasted mock up.. so my issue is not sure where to go from here.. was thinking stay with the purple and black and do the valve cover a gun metal.. or going with a red black and gun metal valve cover.. just not sure.. any thoughts??
Be sure to loctite the countersunk phillips screw in the wheel stop on that TB and be prepared to drill an extra hole to put the spring under some additional tension at full closed. I almost had a catastrophic failure on track due to that damn thing.
Be sure to loctite the countersunk phillips screw in the wheel stop on that TB and be prepared to drill an extra hole to put the spring under some additional tension at full closed. I almost had a catastrophic failure on track due to that damn thing.
thanks for the heads up.. will pass that along.. we are also changing the accelerator line and making it shorter.
06-15-2018, 09:45 PM
