Spoon Feds's MY00 NFR AP1 "build"
#61
Thread Starter
Did you bed-in the pads? I tried finding info but the Endless pages I did find don't have a bed in process unless you're running their race specific pads.
#62
Yes, you will want to bed them in. Just follow the bedding instructions you find on Ferodo or Stoptech's site. Basically a general number of applications from a certain speed to almost a stop, followed by some cooling periods.
The following users liked this post:
Bri (05-08-2019)
#64
Thread Starter
Small update:
Decided to try the Cleib 70mm single. I like the simplicity of the design. its fed via Toda 60mm ~ 70mm test pipe with an O2 fix installed in the bung.
Jury is still out on weather or not I'm completely satisfied with it. Idle sounds awesome, and 4,000 to 9,000 rpm is mind blowing, but the drone between 2,500 and 4,000 rpm (under load) with the hard top on is prominent.
Going to take it for a proper drive tonight to get a better feel for it.
The is the only pic I had time for.
Decided to try the Cleib 70mm single. I like the simplicity of the design. its fed via Toda 60mm ~ 70mm test pipe with an O2 fix installed in the bung.
Jury is still out on weather or not I'm completely satisfied with it. Idle sounds awesome, and 4,000 to 9,000 rpm is mind blowing, but the drone between 2,500 and 4,000 rpm (under load) with the hard top on is prominent.
Going to take it for a proper drive tonight to get a better feel for it.
The is the only pic I had time for.
#65
Registered User
Nice choice of exhaust, I love how minimal the tip looks, nothing too big or flashy.
Sat in a buddy's car with a cleib exhaust once and do agree, the drone is pretty intense at those rpms.
Sat in a buddy's car with a cleib exhaust once and do agree, the drone is pretty intense at those rpms.
The following users liked this post:
Spoon Fed (07-11-2019)
#68
Thread Starter
#69
Thread Starter
Ya its the way to go. I was in love with the today TP the day I saw it, years ago. The Cleib exhaust, aesthetically, checked most of the boxes. I wanted something like a Spoon N1 (if they made it in 70MM). Single, stainless, minimalist, no burnt tip, round muffler, resonator etc. The Cleib was it.