17x9 17x10 6UL @ 949 Racing
#1
17x9 17x10 6UL @ 949 Racing
We posted an announcement in wheels/tires a few weeks ago but wanted to shout out to the SoCal S2K crew here too
S2000 fitments are 17x9 and 17x10
Our 17x9 is a +55 , 17.2 lbs. This offset is basically ¼” further out than a +63 wheel so you have additional room inboard up front, but lose a little room outboard.
We also build a 17x9 +48 , 17.4 lbs for the 2006-2015 Mazda MX5 and many Japanese sedans. This offset on an S2000 tends to rub outboard a bit even with full race camber. More bump steer, rubbing and tire scrub so we generally don’t recommend it. We know the +48 looks cool but they will rub. +55 woks better with or without race camber.
Our 17x10 +52, 17.8 lbs is a race fitment optimized for 255/40/17 square setups. This requires rolling fenders along with full race camber. The +52 is too low offset for 275/40's in rear though. We can make 17x10 +68 for 275/40 rear next year if we get enough emails asking for them specifically (not forum posts).
We will be uploading wheel templates to our website for folks to check their BBK’s against.
The 17x9 +55 clears all 298-325mm BBK’s except the Spoon
The 17x10 +52 clears those plus a few 355mm kits
Wheels should begin arriving here late October through mid November 2015. We only really make what we have pre-orders for so “waiting until they’re in stock” may not work. If our we and our dealers don't get any pre orders for say 17x9 +55 Bronze, we not make any at all in that size/finish
FYI, we also have 17x8, 17x9 5x100 for the FRS/BRZ/Tc and some Toyotas as well as 17x8, 17x9 for the new 2016 "ND" Miata
Prices, finishes and ordering info on the websites. For now, the only two dealers that will carry the S2000 specific wheels will be Jackson Racing and us 949 Racing.
Silver
Tungsten
Bronze
Charcoal - same finish as 5 lug version
S2000 fitments are 17x9 and 17x10
Our 17x9 is a +55 , 17.2 lbs. This offset is basically ¼” further out than a +63 wheel so you have additional room inboard up front, but lose a little room outboard.
We also build a 17x9 +48 , 17.4 lbs for the 2006-2015 Mazda MX5 and many Japanese sedans. This offset on an S2000 tends to rub outboard a bit even with full race camber. More bump steer, rubbing and tire scrub so we generally don’t recommend it. We know the +48 looks cool but they will rub. +55 woks better with or without race camber.
Our 17x10 +52, 17.8 lbs is a race fitment optimized for 255/40/17 square setups. This requires rolling fenders along with full race camber. The +52 is too low offset for 275/40's in rear though. We can make 17x10 +68 for 275/40 rear next year if we get enough emails asking for them specifically (not forum posts).
We will be uploading wheel templates to our website for folks to check their BBK’s against.
The 17x9 +55 clears all 298-325mm BBK’s except the Spoon
The 17x10 +52 clears those plus a few 355mm kits
Wheels should begin arriving here late October through mid November 2015. We only really make what we have pre-orders for so “waiting until they’re in stock” may not work. If our we and our dealers don't get any pre orders for say 17x9 +55 Bronze, we not make any at all in that size/finish
FYI, we also have 17x8, 17x9 5x100 for the FRS/BRZ/Tc and some Toyotas as well as 17x8, 17x9 for the new 2016 "ND" Miata
Prices, finishes and ordering info on the websites. For now, the only two dealers that will carry the S2000 specific wheels will be Jackson Racing and us 949 Racing.
Silver
Tungsten
Bronze
Charcoal - same finish as 5 lug version
Thread
Thread Starter
Forum
Replies
Last Post