Mark this thread as Sold
*SOCAL* 1993 Mazda rx7 FS/FT $11,500
#1
*SOCAL* 1993 Mazda rx7 FS/FT $11,500
Name: Michael
Location: Socal 626
Means of Contact: PM or email at emtee817@gmail.com
Description:
I am looking to sell my 1993 FD rx7 for $11,500 obo. however, i would rather trade for a nice s2000.
Here is a detailed list of my car.
It has a freshly rebuilt motor with about 300 miles
-street ported rotor housings from Palm Tree Rotary
-rotary aviation apex seals
-apexi intakes
-greddy elbow (not installed)
-larger aluminum radiator
-larger front mount intercooler
-apexi bov
-exedy clutch with resurfaced flywheel
-odyssey battery
suspension
- tockico illumina shocks with h&r springs
-jic coilovers with swift springs (not on the car)
exterior/exhaust
-99 spec front lip
-3 inch dpwnpipe (not on the car)
-3 inch jic bullet catback exhaust
-GT300 style rear diffuser (not on the car)
bads
-needs a paint job
-quarter panel has a portion rusted away because it was
an Illinois car and sat for a while but rust is not spreading and has not in the past 2 years according to the previous owner.
-has one wheel stud missing but I have the stud to replace it
-needs new tires, the stock rims will come with the car. the wheels in the pictures arent mine.
all in all, the car runs fine and the chassis only has 97000 miles on it. The smog was just done and registration was just paid for and has a clean CA title. Email me for more pictures. If you are interested, please let me know, thanks.
-mike
Location: Socal 626
Means of Contact: PM or email at emtee817@gmail.com
Description:
I am looking to sell my 1993 FD rx7 for $11,500 obo. however, i would rather trade for a nice s2000.
Here is a detailed list of my car.
It has a freshly rebuilt motor with about 300 miles
-street ported rotor housings from Palm Tree Rotary
-rotary aviation apex seals
-apexi intakes
-greddy elbow (not installed)
-larger aluminum radiator
-larger front mount intercooler
-apexi bov
-exedy clutch with resurfaced flywheel
-odyssey battery
suspension
- tockico illumina shocks with h&r springs
-jic coilovers with swift springs (not on the car)
exterior/exhaust
-99 spec front lip
-3 inch dpwnpipe (not on the car)
-3 inch jic bullet catback exhaust
-GT300 style rear diffuser (not on the car)
bads
-needs a paint job
-quarter panel has a portion rusted away because it was
an Illinois car and sat for a while but rust is not spreading and has not in the past 2 years according to the previous owner.
-has one wheel stud missing but I have the stud to replace it
-needs new tires, the stock rims will come with the car. the wheels in the pictures arent mine.
all in all, the car runs fine and the chassis only has 97000 miles on it. The smog was just done and registration was just paid for and has a clean CA title. Email me for more pictures. If you are interested, please let me know, thanks.
-mike
#7
@ jimbo: no thanks on the prelude.
@e.min: it was a shop in costa mesa called Josho Auto and i have the receipts for the rebuild. His name is Tomo and has all the certification proving that he was a Mazda tech in japan and all certifications to be a mechanic here. He is a one man shop and took the time to do things right. He also has had his RX3 with a 13b featured in a Japanese classic car magazine but i forgot which one it would be. If youre into classics, he has a purple rx3.
Let me know if you have any further questions, thanks.
@e.min: it was a shop in costa mesa called Josho Auto and i have the receipts for the rebuild. His name is Tomo and has all the certification proving that he was a Mazda tech in japan and all certifications to be a mechanic here. He is a one man shop and took the time to do things right. He also has had his RX3 with a 13b featured in a Japanese classic car magazine but i forgot which one it would be. If youre into classics, he has a purple rx3.
Let me know if you have any further questions, thanks.