Mark this thread as Sold
FS:NY 01 silverstone rolling chassis + extras
#1
Registered User
Thread Starter
Join Date: Mar 2012
Posts: 1,093
Likes: 0
Received 0 Likes
on
0 Posts
FS:NY 01 silverstone rolling chassis + extras
chassis has 105k miles on
rear end has less than 15k miles on it since rebuild
transmission has same mileage as chassis
Please PM me if you're interested and I can give you my number and we can set something up.
I took a bunch of pictures of everything but for some reason my camera won't load onto my computer. So i've included some random pictures to give you an idea of what the car looks like currently and previously
the motor blew in may and i really haven't had much time to do anything with it and could use the spare cash for work
details:
Rear fenders are rolled and pulled. slight bump in on rear quarter. might be able to be fixed with pdr or thru door jam. haven't tried.
front bumper grille is cut off for FMIC
soft top works well with no tears or rips but rear plastic window has blemishes
original passenger side fender was dented so i used it to practice flaring fenders. I have an extra pair of good condition fenders in a different color as well as original drivers side fender.
car was originally black/red interior but red seats were in poor condition and switched out for better condition black seats
maintenance: ABS Sensors, knock sensor, both rear hubs with new rear bearings and extended arp studs, new slotted rotors, new raysbestos pads, tranny fluid and diff fluid was changed
aftermarket stuff: megan track coilovers, axle spacers, relocated fuse box, relocated battery, extended floor mats. has aftermarket headunit but it will be removed and replaced with OEM unit. AEM Digital wideband, AEM digital boost gauge , glowshift digital oil pressure gauge, glowshift digital water temp gauge
comes on stock AP1 wheels
comes with ALL oem parts. air pump setup, oem exhaust, 3 oem struts, all a/c lines, cruise control, stock radiator, air box oem header, ecu etc. i probably have other stuff but i am forgetting it. if it came on the car from honda chances are it will go with it for this sale.
will come with head. missing cams and valve cover but in otherwise good condition
will come with bottom end- cylinder wall damage crank still good
i will include izze air pump fix, but air pump is also included as stated above.
i can remove all of the gauges and take off 300bucks. i can remove the coilovers and take off 500bucks
located in 14224
$5500 firm
CLEAN TITLE !! (minus small lien)
pass side qtr dent
engine bay current (brake booster and MC have been removed but are included obv. car currently doesn't have brake pressure
random picture i found of my car on instagram from last year
current gauge setup- small holes drilled into dash for pods FYI. if pillar pod is removed you will need a new a-pillar cover from honda
driver side doesnt have a Dent but the body line is smooth on qtr panel
rear end has less than 15k miles on it since rebuild
transmission has same mileage as chassis
Please PM me if you're interested and I can give you my number and we can set something up.
I took a bunch of pictures of everything but for some reason my camera won't load onto my computer. So i've included some random pictures to give you an idea of what the car looks like currently and previously
the motor blew in may and i really haven't had much time to do anything with it and could use the spare cash for work
details:
Rear fenders are rolled and pulled. slight bump in on rear quarter. might be able to be fixed with pdr or thru door jam. haven't tried.
front bumper grille is cut off for FMIC
soft top works well with no tears or rips but rear plastic window has blemishes
original passenger side fender was dented so i used it to practice flaring fenders. I have an extra pair of good condition fenders in a different color as well as original drivers side fender.
car was originally black/red interior but red seats were in poor condition and switched out for better condition black seats
maintenance: ABS Sensors, knock sensor, both rear hubs with new rear bearings and extended arp studs, new slotted rotors, new raysbestos pads, tranny fluid and diff fluid was changed
aftermarket stuff: megan track coilovers, axle spacers, relocated fuse box, relocated battery, extended floor mats. has aftermarket headunit but it will be removed and replaced with OEM unit. AEM Digital wideband, AEM digital boost gauge , glowshift digital oil pressure gauge, glowshift digital water temp gauge
comes on stock AP1 wheels
comes with ALL oem parts. air pump setup, oem exhaust, 3 oem struts, all a/c lines, cruise control, stock radiator, air box oem header, ecu etc. i probably have other stuff but i am forgetting it. if it came on the car from honda chances are it will go with it for this sale.
will come with head. missing cams and valve cover but in otherwise good condition
will come with bottom end- cylinder wall damage crank still good
i will include izze air pump fix, but air pump is also included as stated above.
i can remove all of the gauges and take off 300bucks. i can remove the coilovers and take off 500bucks
located in 14224
$5500 firm
CLEAN TITLE !! (minus small lien)
pass side qtr dent
engine bay current (brake booster and MC have been removed but are included obv. car currently doesn't have brake pressure
random picture i found of my car on instagram from last year
current gauge setup- small holes drilled into dash for pods FYI. if pillar pod is removed you will need a new a-pillar cover from honda
driver side doesnt have a Dent but the body line is smooth on qtr panel
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Moddiction
Sponsor S2000 Exterior and S2000 Interior Deals
31
10-24-2012 10:53 AM
Fujin
California - Bay Area S2000 Owners
31
01-09-2012 05:34 PM
Moddiction
S2000 Modifications and Parts
13
06-24-2011 02:27 PM