Mark this thread as Unsold
OH -2004 Comptech Supercharged - Mugen - BBS - 17,000 miles - $36,999 - one owner
#1
Registered User
Thread Starter
OH -2004 Comptech Supercharged - Mugen - BBS - 17,000 miles - $36,999 - one owner
Name: Eric
Price: $36,999
Location: NW Ohio
Contact: call or text 419-956-8664
2004 Honda S2000. Just 17,377 miles. I purchased the car brand new from Brown Honda in Toledo, Ohio in 2004. All aftermarket parts are genuine. All work was performed by Bullitt Proof Performance in Westlake, Ohio (also an S2KI member). No accidents, clean title in hand. Meticulously built, maintained and cared for. This S2000 is ready for the show, ready for the track or ready for your collection. It was built with the track in mind, but in all the years, it never made it there with my busy schedule.
Exterior Modifications:
Mugen Hardtop
Mugen License Plate Bolts
Honda OEM Front Lip
APR Carbon Front Splitter
AJR Carbon Side Diffusers
JDM Honda "H" Badges
JDM Clear Fender Lights
The entire front end of the car has been clear bra'd. The trunk tail was custom done by the Bullitt Proof Performance. There were no parts added to create this tail piece.
Wheels/Tires/Brakes:
BBS LM 18x8 front, 18x9.5 rear
Bridgestone RE050A (225/40 front, 265/35 rear)
Wilwood DP6 Lug Mount Front Calipers
Wilwood 13" Front Slotted Two Piece Rotors With Wilwood Hats
Wilwood CPB Rear Calipers
Wilwood 13" Rear Slotted Two Piece Rotors With Wilwood Hats
Wilwood Stainless Steel Brake Lines
Wilwood BP-10 Brake Pads
The BBS LM's have been custom powder coated by Bullitt Proof Performance. The barrels and lips are finished in ultra high gloss black and the faces are finished in satin black. The fasteners have been polished.
Suspension:
Zeal Function X Coilovers. (fully adjustable and serviceable)
Comptech Titanium Strut Tower Bar
Comptech X Brace
Engine/Drivetrain:
Mugen 2.2L Header
Mugen Titanium Exhaust
Mugen Oil Cap
Comptech Supercharger
Comptech Aftercooler
Comptech Carbon Air Intake
Comptech Differential
Comptech Billet Battery Tie Down
Comptech 4.57 Final Drive
ACT Clutch and Flywheel
Clutch Delay Removal
ARC Radiator Cap
ARC Cooling Plate
Valve Cover and Injector Cover were powder coated metallic Bullitt Proof green and satin black respectively.
Interior:
Mugen S1-R Racing Seats
Mugen Seat Rails
JDM Honda Leather Steering Wheel w/Red Stitching
Custom Leather Door Panels w/Red Stitching
Custom Leather Door Handles w/Red Stitching
Custom Leather Console Cover w/Red Stitching
Custom Leather Armrest w/Red Stitching
Custom Leather Shift Knob w/Red Stitching
Custom Leather Shift Boot w/Red Stitching
Custom Leather E-Brake w/Red Stitching
The roll bar/harness bar was custom fabricated by Bullitt Proof Performance. The interior panels were precisely cut, molded and fitted around the roll bar, as to give an OEM look. The roll bar is finished in Silverstone. Harnesses have never been installed.
No expense was spared in the building and care of this S2000. The whole idea was to create a vehicle as if Honda themselves created it. I didn't want it to look aftermarket. I wanted it to look OEM.
If you have questions, please feel free to PM me and we'll go from there. It has been fun being part of the S2KI community.
Price: $36,999
Location: NW Ohio
Contact: call or text 419-956-8664
2004 Honda S2000. Just 17,377 miles. I purchased the car brand new from Brown Honda in Toledo, Ohio in 2004. All aftermarket parts are genuine. All work was performed by Bullitt Proof Performance in Westlake, Ohio (also an S2KI member). No accidents, clean title in hand. Meticulously built, maintained and cared for. This S2000 is ready for the show, ready for the track or ready for your collection. It was built with the track in mind, but in all the years, it never made it there with my busy schedule.
Exterior Modifications:
Mugen Hardtop
Mugen License Plate Bolts
Honda OEM Front Lip
APR Carbon Front Splitter
AJR Carbon Side Diffusers
JDM Honda "H" Badges
JDM Clear Fender Lights
The entire front end of the car has been clear bra'd. The trunk tail was custom done by the Bullitt Proof Performance. There were no parts added to create this tail piece.
Wheels/Tires/Brakes:
BBS LM 18x8 front, 18x9.5 rear
Bridgestone RE050A (225/40 front, 265/35 rear)
Wilwood DP6 Lug Mount Front Calipers
Wilwood 13" Front Slotted Two Piece Rotors With Wilwood Hats
Wilwood CPB Rear Calipers
Wilwood 13" Rear Slotted Two Piece Rotors With Wilwood Hats
Wilwood Stainless Steel Brake Lines
Wilwood BP-10 Brake Pads
The BBS LM's have been custom powder coated by Bullitt Proof Performance. The barrels and lips are finished in ultra high gloss black and the faces are finished in satin black. The fasteners have been polished.
Suspension:
Zeal Function X Coilovers. (fully adjustable and serviceable)
Comptech Titanium Strut Tower Bar
Comptech X Brace
Engine/Drivetrain:
Mugen 2.2L Header
Mugen Titanium Exhaust
Mugen Oil Cap
Comptech Supercharger
Comptech Aftercooler
Comptech Carbon Air Intake
Comptech Differential
Comptech Billet Battery Tie Down
Comptech 4.57 Final Drive
ACT Clutch and Flywheel
Clutch Delay Removal
ARC Radiator Cap
ARC Cooling Plate
Valve Cover and Injector Cover were powder coated metallic Bullitt Proof green and satin black respectively.
Interior:
Mugen S1-R Racing Seats
Mugen Seat Rails
JDM Honda Leather Steering Wheel w/Red Stitching
Custom Leather Door Panels w/Red Stitching
Custom Leather Door Handles w/Red Stitching
Custom Leather Console Cover w/Red Stitching
Custom Leather Armrest w/Red Stitching
Custom Leather Shift Knob w/Red Stitching
Custom Leather Shift Boot w/Red Stitching
Custom Leather E-Brake w/Red Stitching
The roll bar/harness bar was custom fabricated by Bullitt Proof Performance. The interior panels were precisely cut, molded and fitted around the roll bar, as to give an OEM look. The roll bar is finished in Silverstone. Harnesses have never been installed.
No expense was spared in the building and care of this S2000. The whole idea was to create a vehicle as if Honda themselves created it. I didn't want it to look aftermarket. I wanted it to look OEM.
If you have questions, please feel free to PM me and we'll go from there. It has been fun being part of the S2KI community.
Last edited by SaltyDog; 06-21-2019 at 05:30 AM. Reason: Added state in title
The following users liked this post:
Hakkaboy (06-25-2019)
Thread
Thread Starter
Forum
Replies
Last Post