Billman250, March 1, 2 & 3, 18067
 

Ladies and Gentlemen,

If you want or need any S2000 services from Billman but just couldn't or didn't want to make the drive to Long Island, now is your chance.

Who: Billman250

What: Valve Adj., TCT Billmans Lifetime Guarantee (timing chain tensioner), Once-Over, Fluids, Brake Pads, etc. More info here.

When: Fri. Sat & Sun March 1, 2 & 3rd.

Where: Northampton, PA 18067 (pm for address specifics)

Why: S2000 Mechanical Expertise.


PM Billman for specifics on services, pricing, parts and / or supplies.

Something to think about............ If you are asking Billman to do a valve adjustment, DO NOT show up 15 minutes before your scheduled appointment!!! Give your engine some time to cool before Billman lays his hands on it. I can and will have some portable fans to help cool the engine. Again, something to think about.


Thur. Feb. 28th

freq

Fri. March 1st Scheduled Attendees:

SkiLLeDS2000


Sat. March 2nd Scheduled Attendees:

Back S2k

kndonlee

jordannn93

J08C20 ?

tbp5022

berlinablackie

andrewv

Sun. March 3rd Scheduled Attendees:

Legion

switchblade

How many cars is he able to fit in on both those days?

I'd like to reserve a spot. Put me down for a once over and valve adjustment, possibly more after I PM Bill for pricing.

Finally!

im down for a valve adjustment!

Oh well, sounds like a great end of winter get together. I'll be coming home from Yellowstone on Sunday, so I can't make it.

Enjoy guys.

I'm going to inquire a once over with Billman, I will let you know if I will be making it or not.

Tyler

I want to go for valve adjustment

I want a TCT, I would prefer the 3rd as well but can do either day, do we have an idea on prices?

Interested in the once over and the seat locks. Just PM'd Billman.

can i come just to hang out?

Sure. Pick a day.

I'm sure my wife won't let us go hungry. Lots of N/A beverages in the garage refrigerator too.

I'm interested in a Billman once over. I never met any of you, but this would be a good time to introduce myself,

Larry

Guys,

If you have confirmation from Bill, and know what day you will be showing up at my place, please let me know so that we have an idea for food and beverages.

Thanks.

-joe

im in for the 2nd

sucks i'll be away :(

Due to time constraints, I am limited to only these services. Seems I have many cars to attend to...

- 3rd generation MODIFIED TCT (timing chain tensioner) with lifetime guarantee
- 4th generation MODIFIED TCT
- transmission rebuilding, WHILE YOU WAIT (limit one car, already taken by freq)
- modified soft top latches
- Custom Valve adjustment, retainer inspection, & spark plug torque check
- Air filter
- cabin filter
- clutch fluid change, clutch adjust, and throttle adjust
- 4 wheel brake fluid flush with ate super blue
- spark plug replacement (Honda S2000 spec'd NGK's, not the ones you buy online)
- Tire-saver toe-in adjustment, no alignment needed
- axle nut tsb
- Loose 12V outlet fix
- topdown mod
- AC mod (02-09)
- soft-top anti-rip mod
- soft-top anti-rip instruction

please PM me for a time slot, and be sure to include you cell number :thumbup:

I may have to add Thursday eve to this trip and Friday morning. Is anyone available Thursday eve, Friday morn or afternoon or eve? :rev:

I could use a valve adjustment. I'm available most the day Saturday and until like 3 on Sunday.

Friday morning works for me.

Friday March 1st is a full on GO!!!

Schedule your appointments now with Billman.

Once you have a firm appointment with Bill, him or myself will give you my address.

See you all soon.

-joe

Will start on joes trans thursday eve 6pm ish, if anyone else can come then please let me know.

This is awesome :thumbup:

Hey Joe,

Just confirmed Saturday the 2nd at 1:00 PM with Bill for a Valve Adjustment, TSB Nut and Spark Plugs change. I will be arriving around noon to allow the car sometime to cool down. Looking forward to stopping by and hanging out with a few of the member and yourself. If you would like me to bring anything to eat or some sodie pops just let me know.

Tyler

appts so far for joes reference, one car per time slot, i will add as time goes on: booked in bold:

thursday (one slot open)
1pm last open slot on thursday
3pm to close, (Joe the host)

fri
-7:30am
-10am
-1pm
3pm slot open

sat (full)
-9am
-9:15am
-10:30am
-1pm
-2pm
-3pm



sunday (full)
-9am
-11am
-1pm (20 min job, last appt)

PM'd both bill and Joe. Saturday afternoon.....2pm,

Valve adj, tct, axle nut

slots updated.

PM'd. Sunday @ 9a.m. for VA.

So, I'm a weather junkie because I have a snow removal business and the current models are calling for a "winter storm" around the 1st-2nd :banghead: . Brine and salt are bad!

Thats a good point, my car has never seen snow or salt, thats not something I would like to change. I could just swing by and pick up the parts if that is cool.

I have some open space on fri, not sure how it will pan out.

you are a quickie so anytime is good. Even thurs.

Lots of updates.

Let me know if you have a confirmed appt. with Bill and you aren't on my list, please.

Everyone should have my address by now too.

Thanks, I'll take a look at the weather as we get closer but I'll probably try to keep it on Sunday unless another time is better for you.

updated.

Only a few more days. Can't wait. Hopefully the weather is decent.

Weather is looking good!

Great!

50*F+ would be nice but as long as the sun is shining .......

Do you have a welder? I need to take exhaust off xB and get a crack welded to pass inspection. I'll do removal and replace someone else can do welding.

No, I don't work on Toyotas / Scions.

What if I bring the welder. You or Bill do the welding? It's a Lexus!

Owned a machinist/fabrication/welding biz for 12 years. Think I can handle it :)

updated one more time...on the road tomorrow...

Cool thanks!

I just drove 2 hours at some excessive speeds after Billman preformed the following tasks,

Valve Adj
TcT 3rd gen
Eibach springs
Clutch fluid
and a bunch of different adjustments

Let me say, what a difference it makes! The car is so tight and smoother, it's crazy. Billman, thanks for working on my car! I'm so glad I did it!

Larry

Joe, I'm probably going to arrive around 11am Saturday...ahead of my scheduled appointment. Just hanging out, maybe learn something, let the car cool down.

^^ Awesome!!

My car is off jackstands and having a fresh second gear is SWEET!!!!

Now for the CR trunklid, wing and a freshly painted cooling plate. Yeah man.

Make this X2. Chris, are you taking 476 down the interstate to head to Joe's house? Interested in meeting up off Quakertown exit tomorrow around 10:30 AM? I realize it's late but why not get a top down mini-caravan if possible. If I don't hear back from you I will be in around noon. Just shoot me a PM with your cell if you get this and want to meet up, I will check tomorrow AM around 8:30 to see if you're down.

Looking forward to possibly learning something tomorrow and catching up with some fellow members.

Tyler

im like 15 minutes from quakertown if you guys are cruising down ioll come early as well with you guys to hang out till my appointment at 3

Tyler, I'm in...I left you a PM.

Big thanks to Billman and Freq (and Tammy)! And it was nice meeting everyone who was there today!

:thumbup: :thumbup:

Our pleasure. "Keep it clean!!"

Big thanks to Joe and Tammy for hosting. Thanks again Bill for everything, the car is a lot crisper and I can the difference. Nice meeting everybody today, thanks for meeting up with me for the caravan down Chris and Andrew.

Appreciate everyone's hospitality, had a great afternoon.

Tyler

This was a great event! Thanks billman for all your hard work and education....

Thanks to Joe and Tammy for your hospitality! The food was fantastic, especially that dip!

And I really appreciate Jammie's tour around the //M3...... :thumbup:

Again, Thanks Billman, Joe and Tammy! I really appreciate it. It was great meeting you guys!

Good to see this went on nicely. 'Tis the season for wrenching; I've been shuffling wrenches from one bike to the next every so often for a couple months. :thumbup: The Boxster should finally be coming home from a month and a half stay in the shop later this week, barring any more delays.

I'd say it was a successful weekend. :cool:

I want to thank everyone for making the trip to my place. It was great meeting all of the new faces and seeing some of the old.

My second gear grind is gone. My CR wing and decklid are on the car and look incredible. My AUT cooling plate has been painted Berlina and I got that installed under the hood as well. Looks factory. (pics later, maybe)

To finish things off, we went to LVGP to try out the new 9hp karts and the new track layout. Damn, am I sore. Karts are quick.

What can be said about Billman that hasn't been said before? Thank you, thank you, thank you!!

FUK am I sore!!!

Kajira and I would like to that Joe and Tammy for their hospitality, and all the guys that came down for the wrenching. It was a fun event for sure, and finished out with some fast kart racing.

See you guys again in july...possible second tech days, maybe we will pull some transmissions :)

Thanks again Freq and Billman for putting this on!! Glad my retainers were great (AP1)!!
Looks great!! Time to hit the track dude!!

That car is more "hard parked" than tracked! :)

I'll bet it is on jack stands already.

LOL, wouldn't suprise me!

:crycry:

it IS on jackstands isn't it! I knew it.

You better drive that thing fast enough to bend that wing. I have seen pics of that wing bend at track speeds. You better be that fast(on the track).

.....and where is your car(s)?

Count me in

Dude, you bumped last years thread. :scratch: