Drivetrain DIY and FAQ
#1
Former Moderator
Thread Starter
Drivetrain DIY and FAQ
Hopefully this will make accessing DIY's and FAQ's much easier.
Let me know if there's a DIY or FAQ you'd like me to add.
This is still very new so I know lots is missing right now
Let me know if there's a DIY or FAQ you'd like me to add.
This is still very new so I know lots is missing right now
#4
Wow nothing has been added to this for over a year lol.
This was helpful for me:
DIY Bucket swap
for those having issues with vibration on acceleration.
https://www.s2ki.com/s2000/topic/241...diy-with-pics/
Heres from the manual:
SAE 90, GL5 or GL6
Honestly I think its like engine oil.. As long as it's there and clean then you are ok. Ofcourse there is always a preference with this one too. Could be wrong. I just found some off the shelf at a local auto parts store. Also it depends on the application and what not.
This was helpful for me:
DIY Bucket swap
for those having issues with vibration on acceleration.
https://www.s2ki.com/s2000/topic/241...diy-with-pics/
SAE 90, GL5 or GL6
Honestly I think its like engine oil.. As long as it's there and clean then you are ok. Ofcourse there is always a preference with this one too. Could be wrong. I just found some off the shelf at a local auto parts store. Also it depends on the application and what not.
#6
Like I said IMO as long as its new clean fluid and its manufacture spec it should be fine . I would still get a second opinion. If all else fails its not incredibly hard to change it out again
Thread
Thread Starter
Forum
Replies
Last Post