Mark this thread as Unsold
FS: 2001 AP1 ~118k w/ rollbar
01-27-2018, 10:08 AM
#1
Thread Starter
FS: 2001 AP1 ~118k w/ rollbar
Name: Nick
Location: Melbourne
Contact: PM
Price: $9000
Selling my 2001 AP1 track car with ~118k on the odometer, a little less miles since I ran my F24 motor in this car for 2 years.
Car runs and drives excellent, only selling due to family reasons. I wouldn't hesitate to take this out to sebring for track days.
Full interior in front of the seats. AC/heat.
Exterior looks like a 17 year old car. Rock chips, small dents, paint issues, etc.
ACT HD pressure plate, OEM disc, OEM TO bearing, AP1 flywheel. Clutch pedal feels amazing.
New rotors and brake pads.
Rebuilt BMC and booster.
Stainless Steel brake lines.
Car has RSG single diagonal rollbar that meets SCCA/NASA requirements. Rollbar has Harddog padding and leather cover. Stock bulk head bar installed with stock seat belts.
Driver/Passenger Not Really Good large bucket seats that fit a 36" waist comfortably, BC rails.
Car has stock seat belts and a 6pt harness installed on the driver side, the passenger has eye bolts for sub straps and trans tunnel, also have bolt for stock eye bolt. Can throw in near mint passenger side harness.
Motor is all stock including airbox, some engine bay stuff has been removed. Deleted the air pump/EGR stuff. The stock ECU has a jumper harness for a VAFC with the Izze Engineering air pump simulator. VAFC included.
Valve cover has the rainh8er mod and catch can, but the can is not currently plumbed. Catch can will be included.
Stock cat with o2 sensors, aftermarket dual exhaust catback.
Car has the hardware on the brake dust shields and bumper for 2.5" brake ducts but no ducts currently installed.
All bushings replaced with purple Powerflex poly bushings except Front upper control arm bushings are Delrin offset bushings for extra camber.
Car is on MY05 coilovers with 35k.
Stock AP1 sway bars.
Includes spare color matching trunk for wing, has holes drilled for APR gtc250 and spoon wing bases.
Original hood included. Hood that has stickers on it has modified skeleton for clearance.
17x9 TSW Nurbergrings with RS3 tires. Clears Stoptech BBKs
AP1 OEM lip, is cracked.
Some extra parts that will be for sale to buyer at discounted price
HKS 75mm exhaust with 70mm custom test pipe with long resonator for reducing drone.
JRZ Motorsport coilovers, single adjustable
Battle Aero chassis mounted wing with cut bumper
PICS: https://imgur.com/a/gwh6E
Location: Melbourne
Contact: PM
Price: $9000
Selling my 2001 AP1 track car with ~118k on the odometer, a little less miles since I ran my F24 motor in this car for 2 years.
Car runs and drives excellent, only selling due to family reasons. I wouldn't hesitate to take this out to sebring for track days.
Full interior in front of the seats. AC/heat.
Exterior looks like a 17 year old car. Rock chips, small dents, paint issues, etc.
ACT HD pressure plate, OEM disc, OEM TO bearing, AP1 flywheel. Clutch pedal feels amazing.
New rotors and brake pads.
Rebuilt BMC and booster.
Stainless Steel brake lines.
Car has RSG single diagonal rollbar that meets SCCA/NASA requirements. Rollbar has Harddog padding and leather cover. Stock bulk head bar installed with stock seat belts.
Driver/Passenger Not Really Good large bucket seats that fit a 36" waist comfortably, BC rails.
Car has stock seat belts and a 6pt harness installed on the driver side, the passenger has eye bolts for sub straps and trans tunnel, also have bolt for stock eye bolt. Can throw in near mint passenger side harness.
Motor is all stock including airbox, some engine bay stuff has been removed. Deleted the air pump/EGR stuff. The stock ECU has a jumper harness for a VAFC with the Izze Engineering air pump simulator. VAFC included.
Valve cover has the rainh8er mod and catch can, but the can is not currently plumbed. Catch can will be included.
Stock cat with o2 sensors, aftermarket dual exhaust catback.
Car has the hardware on the brake dust shields and bumper for 2.5" brake ducts but no ducts currently installed.
All bushings replaced with purple Powerflex poly bushings except Front upper control arm bushings are Delrin offset bushings for extra camber.
Car is on MY05 coilovers with 35k.
Stock AP1 sway bars.
Includes spare color matching trunk for wing, has holes drilled for APR gtc250 and spoon wing bases.
Original hood included. Hood that has stickers on it has modified skeleton for clearance.
17x9 TSW Nurbergrings with RS3 tires. Clears Stoptech BBKs
AP1 OEM lip, is cracked.
Some extra parts that will be for sale to buyer at discounted price
HKS 75mm exhaust with 70mm custom test pipe with long resonator for reducing drone.
JRZ Motorsport coilovers, single adjustable
Battle Aero chassis mounted wing with cut bumper
PICS: https://imgur.com/a/gwh6E
Last edited by s2000ellier; 01-27-2018 at 10:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post