CA Trackforged Garrett GTX3576r turbo system
 

First Name: Benton
Price: $2700 shipped $2600 picked up
Location: rosemead, ca
Contact: pm or call if your serious 213-448-7352

I have been running this turbo kit for the past few years with about 15,000 miles with no issues at all. My brother just parted out his s2000 with the ptuning turbo kit and i have decided to put the ptuning turbo kit on my car and sell my kit. I make 450whp on 91 octane and 618whp on e85 with this trackforged kit and there is still more power left on the table.

This is everything it will come with

1. Track Forged t3 front mount/sidewinder t3 manifold. Made with thick wall scedual 40. very strong and beefy manifold. It wrapped with dei titanium wrap
2. Custom 3 inch two piece down pipe made with stainless steel and with vband flanges.
3. Custom Turbo manifold brace made with sway bar endlink and bolts to the front of the engine and rear intake manifold
4. Custom heat shield to protect the fuese box and battery.
5. Custom flex pipe section after the downpipe
6. Wastegate Dump tube
7. Garrett gtx3575r with t3 .63ar hotside. great condition with no shaft play. Comes with correct .035 oil restrictor
8. Custom 4 inch intake pipe with AEM air filter
9. Custom oil cooler setup. Made with high quality earls&good ridge -10 fittings and lines with a generic ebay oil cooler, with a generic oil filter sandwitch plate, with the oil line to feed the turbo.

This is what you will need to get your car running which i'm not including
1 intercooler and intercooler piping
2 tial 44mm wategate or turbo smart 45mm wategate
3 injectors and fuel pump and AEM EMS/hondata/haltech
4 blow of valve

Attachment 82797
Attachment 82798
Attachment 82799
Attachment 82800
Attachment 82801
Attachment 82802
Attachment 82803
Attachment 82804
Attachment 82805
Attachment 82806
Attachment 82807
Attachment 82808
Attachment 82809
Attachment 82810
Attachment 82811
Attachment 82812
Attachment 82813
Attachment 82814

bump

bump