Mark this thread as Unsold
CAN:Honda S2000 Turbo Kit - PLM Mani, GTX3076R, AEM Ems v2
#1
CAN:Honda S2000 Turbo Kit - PLM Mani, GTX3076R, AEM Ems v2
Tyler
Location: Toronto canada
Prices - price in USD and shipping included
Contact - Email only turtlepower@live.ca - sometimes it goes to junk so try both contact methods.
Most of the other parts are sold, but whats left is the main bits. These items are basically brand new and only used on the day of the dyno, unless otherwise mentioned.
Garrett GTX3076R t3 .82 AR - 1300
- This is a GT3076R with a GTX wheel upgrade. The upgrade cost me a total of 400 - the wheel, install, and balancing all done by Jason at RHB Rochester's House of Boost
- He can attest to the condition of the turbo!
- retails for 1400 usd, plus wheel 200, plus bla bla bla. Im only asking 1300 for this. Made 415 whp and 380 lbs ft torque coupled with the PLM manifold and downpipes on 12 psi tuned with the AEM EMS v2 by Brain and APH in toronto. The AEM still has the tune file as well.
- will include oil feed line
PLM Turbo Sidewinder Manifold and Downpipes - 650
- BRAND NEW Used only for one dyno session. Made 410 who 380 tq on 12 Psi with the aformentioned turbo, and aem ems v2 below
- twinscroll t3 dual 38mm wastegate
- retails 800usd
- wrapped in Titanium exhaust heat wrap
AEM EMS V2 - 1000
- like new with cable, box and instruction book (i might not have the instructions) but I should. Used for a few months prior to tune
Spec Stage 2 Clutch kit - $400
-lots of life left, only used about 1 month prior to turbo build/install, to break in properly.
- great reviews online
- stock pedal feel with high torque capacity (it held 380 Torque to the wheel on Brians (APH) Dyno
, without any sign of slipping.
- Retails for 650 USD
Take this KIT for 3000 shipped and save 400$
A few other parts
5 Zigen Fireball Exhaust Muffler - $180
- Burnt Tip , 3” inlet
Tapped Valve Cover ap1 - 150
SR Jasma certified
Location: Toronto canada
Prices - price in USD and shipping included
Contact - Email only turtlepower@live.ca - sometimes it goes to junk so try both contact methods.
Most of the other parts are sold, but whats left is the main bits. These items are basically brand new and only used on the day of the dyno, unless otherwise mentioned.
Garrett GTX3076R t3 .82 AR - 1300
- This is a GT3076R with a GTX wheel upgrade. The upgrade cost me a total of 400 - the wheel, install, and balancing all done by Jason at RHB Rochester's House of Boost
- He can attest to the condition of the turbo!
- retails for 1400 usd, plus wheel 200, plus bla bla bla. Im only asking 1300 for this. Made 415 whp and 380 lbs ft torque coupled with the PLM manifold and downpipes on 12 psi tuned with the AEM EMS v2 by Brain and APH in toronto. The AEM still has the tune file as well.
- will include oil feed line
PLM Turbo Sidewinder Manifold and Downpipes - 650
- BRAND NEW Used only for one dyno session. Made 410 who 380 tq on 12 Psi with the aformentioned turbo, and aem ems v2 below
- twinscroll t3 dual 38mm wastegate
- retails 800usd
- wrapped in Titanium exhaust heat wrap
AEM EMS V2 - 1000
- like new with cable, box and instruction book (i might not have the instructions) but I should. Used for a few months prior to tune
Spec Stage 2 Clutch kit - $400
-lots of life left, only used about 1 month prior to turbo build/install, to break in properly.
- great reviews online
- stock pedal feel with high torque capacity (it held 380 Torque to the wheel on Brians (APH) Dyno
, without any sign of slipping.
- Retails for 650 USD
Take this KIT for 3000 shipped and save 400$
A few other parts
5 Zigen Fireball Exhaust Muffler - $180
- Burnt Tip , 3” inlet
Tapped Valve Cover ap1 - 150
SR Jasma certified
Last edited by turtlepower; 02-15-2018 at 02:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
turtlepower
Forced Induction For Sale
4
11-08-2016 06:50 PM
S2kDriver253
Forced Induction For Sale
16
05-21-2012 02:31 PM