Mark this thread as Unsold
CANADA - GTX3076R T3 .82ar , PLM Turbo Manifold T3 Twinscroll
#1
CANADA - GTX3076R T3 .82ar , PLM Turbo Manifold T3 Twinscroll
Tyler
Location: Toronto
Prices - pretty firm price in USD
Contact - OR Email only turtlepower@live.ca - sometimes it goes to junk so try both contact methods.
Pictures Here : turtlepower14's Library Photobucket
Hey Guys, blew my motor during last pull on the dyno. Alas I have decided to part out a few goodies and start fresh with something less aggressive (ultimate racing kit). Most of the parts are already sold, other than what is listed below. These parts are in almost new condition, obviously tested, and all in working order. My loss is your gain here.
The Kit (manifold, turbo combo) made 412 WHP and 350 Tq, with only 12lbs of boost. Tuned by Brian At APH in Toronto.
Turbo Kit Parts
PLM twinscroll Turbo Manifold t3 and custom Down-pipes - 600
- almost Brand new, used for dyno day only
- wrapped in Titanium header wrap (paired up , not individually, to allow for adequate heat dissipation)
- dual 38mm wastegate ports
Garrett GTX3076R .T3 82 ar - $1300
- like new, used only for dyno, goes without saying no shaft play other than what a normal ball bearing turbo has when oil is drained
- Spins freely of course
- Costs about 1900 before taxes USD - im only asking 1300. Quite a discount here on a barely used item. My loss your gain.
GT30 series Titanium turbo Blanket - 100
AEM EMS V2 - 1200 ( includes stock ap2 map, and the tune for this setup by Brian at Advance Powerhouse here in toronto - with 1000cc injectors, 3" exhaust, etc )
Spec Stage 2 Clutch Kit - disc and pressure plate - lots of life left - broken in and used on dyno Held 380 W torque ( and 410 WHP if that matters) no problem 0 slipping. Rated for up to 399 Tq. 300
AP2 Puddymod Stage 1.5 Differential with 3.64 Gears used maybe 2000 km or less - $1300
Again another solid discount on a barely used item that is a MUST for turbo cars.
Location: Toronto
Prices - pretty firm price in USD
Contact - OR Email only turtlepower@live.ca - sometimes it goes to junk so try both contact methods.
Pictures Here : turtlepower14's Library Photobucket
Hey Guys, blew my motor during last pull on the dyno. Alas I have decided to part out a few goodies and start fresh with something less aggressive (ultimate racing kit). Most of the parts are already sold, other than what is listed below. These parts are in almost new condition, obviously tested, and all in working order. My loss is your gain here.
The Kit (manifold, turbo combo) made 412 WHP and 350 Tq, with only 12lbs of boost. Tuned by Brian At APH in Toronto.
Turbo Kit Parts
PLM twinscroll Turbo Manifold t3 and custom Down-pipes - 600
- almost Brand new, used for dyno day only
- wrapped in Titanium header wrap (paired up , not individually, to allow for adequate heat dissipation)
- dual 38mm wastegate ports
Garrett GTX3076R .T3 82 ar - $1300
- like new, used only for dyno, goes without saying no shaft play other than what a normal ball bearing turbo has when oil is drained
- Spins freely of course
- Costs about 1900 before taxes USD - im only asking 1300. Quite a discount here on a barely used item. My loss your gain.
GT30 series Titanium turbo Blanket - 100
AEM EMS V2 - 1200 ( includes stock ap2 map, and the tune for this setup by Brian at Advance Powerhouse here in toronto - with 1000cc injectors, 3" exhaust, etc )
Spec Stage 2 Clutch Kit - disc and pressure plate - lots of life left - broken in and used on dyno Held 380 W torque ( and 410 WHP if that matters) no problem 0 slipping. Rated for up to 399 Tq. 300
AP2 Puddymod Stage 1.5 Differential with 3.64 Gears used maybe 2000 km or less - $1300
Again another solid discount on a barely used item that is a MUST for turbo cars.
Last edited by turtlepower; 02-15-2018 at 03:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mikecl713
Member S2000 Classifieds and For Sale
5
02-16-2004 07:52 PM