Mark this thread as Unsold
CO - Science of Speed stage 1 supercharger kit, 00-05
#1
CO - Science of Speed stage 1 supercharger kit, 00-05
First Name: John
Price: $4400
Location: City, State: Denver, CO
Contact: PM
**SC kit will come 95% complete. Will need 2 items to be 100%, fuel pump and upper radiator hose connector ($5).**
Selling due to wanting to focus on track racing. I'd rather just not have to worry about the extra heat and stresses that go along with running FI on long track sessions. Interested in partial trades for s2000 goodies as well!
After a long hiatus from s2k ownership, I recently bought myself an AP1 that came supercharged. Supercharger was installed by PO and he then converted from the stage 1 kit to a standalone ecu, 1200cc injectors, e85 and a smaller pulley. Receipts from PO show the sc kit was installed in March of this year and has less than 3k miles since installation. This kit is with the 1220 Paxton blower, engine oil lubricated and aftercooled with heat exchanger included. Will include 1200cc injectors and smaller pulley and belt however these parts should not be run with the FVM and will need a proper ecu management system. I have a quick video of the car running and a few revs. AP1 and early AP2 model (00-05) compatible. Can be used with DBW but would need standalone ECM + tuning.
Price: $4400
Location: City, State: Denver, CO
Contact: PM
**SC kit will come 95% complete. Will need 2 items to be 100%, fuel pump and upper radiator hose connector ($5).**
Selling due to wanting to focus on track racing. I'd rather just not have to worry about the extra heat and stresses that go along with running FI on long track sessions. Interested in partial trades for s2000 goodies as well!
After a long hiatus from s2k ownership, I recently bought myself an AP1 that came supercharged. Supercharger was installed by PO and he then converted from the stage 1 kit to a standalone ecu, 1200cc injectors, e85 and a smaller pulley. Receipts from PO show the sc kit was installed in March of this year and has less than 3k miles since installation. This kit is with the 1220 Paxton blower, engine oil lubricated and aftercooled with heat exchanger included. Will include 1200cc injectors and smaller pulley and belt however these parts should not be run with the FVM and will need a proper ecu management system. I have a quick video of the car running and a few revs. AP1 and early AP2 model (00-05) compatible. Can be used with DBW but would need standalone ECM + tuning.
Last edited by stewpitt; 12-10-2018 at 09:30 PM. Reason: parts update, change of heart
#3
IIRC the 06 is dbw? for the later AP2 years, it doesnt use the FVM module so you would have to contact sos for the dbw kit or just run an aftermarket ecu. I believe there is a blockoff screw for the aftercooler since the ap2 doesnt have an airpump either.
#4
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post