Mark this thread as Sold
ID: BMC race billet pro intake manifold amd accufab 90mm tb
#3
Moderator
Trending Topics
#9
Registered User
Ill bump for you just bc its so f@#king preeetty! Way out of my price range but good luck with sale boss.. Just curious why you went this route in the first place? The stock one is good for 1k hp. Also do you have to run this TB with this mani? Or can you use any tb?
#10
You have to run a complete aftermarket throttle body with this manifold because its a straight 4 bolt pattern with a 90mm opening. I originally bought this manifold because I was planning on making a very very high amount of power. It is possible to make a lot of power on the stock intake manifold, but the better the flow, the less the restriction, the less boost at the same power because of the increased flow. There are a few different high end manifolds like this one and the kinsler and the big gains are not really seen until after the 900whp mark which is what I was originally shooting for but now I have the chassis and drivetrain setup well enough I don't need to make tons of power to go fast.