Mark this thread as Sold
Plazmaman 800+whp Intercooler & Blow-Off Valve
09-20-2012, 05:07 PM
#1
Registered User
Thread Starter
Join Date: Aug 2003
Location: The Beach, CA
Posts: 5,372
Likes: 0
Received 0 Likes
on
0 Posts
Plazmaman 800+whp Intercooler & Blow-Off Valve
****SOLD*******************
I am finally selling my Plazmaman Intercooler. This unit was imported from Australia by one of the best enthusiast parts companies in the world. This intercooler can handle 800whp easily. I'll also be including the Plazmaman 52mm 1000whp Blow Off Valve (flange may not be included, simple v-band). The end-tanks are HAND MOLDED to provide up to 20% more flow than other square intercoolers that are welded together in a bulky mess and they have a swept back design for better flow and fitting. Used for less than 500 miles, it's basically like new. $1500 shipped to the Continental U.S. ************SOLD*******************
Intercooler Features:
- Rapid SWEPT BACK high flow end tanks hand formed from sheet alloy
- 20% more air flow than conventional end tank intercoolers
- Cores are Plazmaman developed 600x300 FISION USA race spec, thermally engineered and are of ultra lightweight construction (5.8 kg's)
- We carefully select the internal core construction that you require for your given horsepower level up to a genuine 800HP capability
- Easy bolt on - no cutting or drilling of holes required. The S2000 requires the ultimate in charge - air cooling to maintain consistancy, reliability and prevent detonation for its high tech big dollar engine
- 16" Tall, 3" depth, 36.5" maximum width (end to end)
- MSRP $899 (not including international shipping)
BOV Features:
- Dual Teflon Seals with tight operation and no leakage under any boost or heat situation
- Oil and fuel resistant
- Capable of 1000hp discharge and extreme street / race application
- V-band mounted
- Precision machine and assembled under strict conditions in-house
https://www.plazmaman.com/shop_itemd...id=203&cate=41
I am finally selling my Plazmaman Intercooler. This unit was imported from Australia by one of the best enthusiast parts companies in the world. This intercooler can handle 800whp easily. I'll also be including the Plazmaman 52mm 1000whp Blow Off Valve (flange may not be included, simple v-band). The end-tanks are HAND MOLDED to provide up to 20% more flow than other square intercoolers that are welded together in a bulky mess and they have a swept back design for better flow and fitting. Used for less than 500 miles, it's basically like new. $1500 shipped to the Continental U.S. ************SOLD*******************
Intercooler Features:
- Rapid SWEPT BACK high flow end tanks hand formed from sheet alloy
- 20% more air flow than conventional end tank intercoolers
- Cores are Plazmaman developed 600x300 FISION USA race spec, thermally engineered and are of ultra lightweight construction (5.8 kg's)
- We carefully select the internal core construction that you require for your given horsepower level up to a genuine 800HP capability
- Easy bolt on - no cutting or drilling of holes required. The S2000 requires the ultimate in charge - air cooling to maintain consistancy, reliability and prevent detonation for its high tech big dollar engine
- 16" Tall, 3" depth, 36.5" maximum width (end to end)
- MSRP $899 (not including international shipping)
BOV Features:
- Dual Teflon Seals with tight operation and no leakage under any boost or heat situation
- Oil and fuel resistant
- Capable of 1000hp discharge and extreme street / race application
- V-band mounted
- Precision machine and assembled under strict conditions in-house
https://www.plazmaman.com/shop_itemd...id=203&cate=41
10-04-2012, 10:09 AM
#4
Registered User
Thread Starter
Join Date: Aug 2003
Location: The Beach, CA
Posts: 5,372
Likes: 0
Received 0 Likes
on
0 Posts
