FS: NIB PTuning Turbo Kit w/ GTX3576R Gen 2
05-19-2018, 04:14 PM
#1
FS: New PTuning Turbo Kit w/ GTX3576R Gen 2
First Name: Alex
Price: $5800
Location: Albuquerque , New Mexico, USA (Shipping Available -- See below)
Contact: cottone.joe@gmail.com Or by PM
For sale is a new in box Ptuning turbo kit with a new GTX3576R Gen 2 Turbo. I was in the group buy last year, and selected option 2 with the recirculated dump tube ($185 option), as I had intended to go V-Mount. That means the kit comes with everything but the intercooler and piping, which if so desired can be sourced from Ptuning directly for $395 as of writing. The itemized list from the Ptuning re-release thread:
PTUNING Billet Aluminum Motor Mount Assembly
PTUNING Heat shield to protect engine mount
PTUNING Turbo oil Scavenging Pump System (includes all oil lines, fittings, relay, and PnP wiring harness)
PTUNING Equal Length V-Band Turbo Manifold (full T304 stainless steel)
Garrett GT(X)3576R Gen 2 Ball Bearing Turbo with Tial SS V-Band Turbine Housing .82AR
PTUNING 3" T304 SS V-band downpipe
PTUNING turbo manifold T304SS heat shield
Turbo GT oil restrictor, feed, and coolant lines
Turbosmart Hyper-Gate 45mm WG
PTUNING hardware installation kit
See the thread here for more details. You can see my name under the "Deposit Paid" list.
https://www.s2ki.com/forums/s2000-fo...lease-1170300/
I'm asking $5800 which is roughly a 15% discount over what they're selling for now, and I won't be making any money off of it. Everything is new and in the original packaging that PTuning shipped to me. I'd be willing to spring for shipping (within the lower 48 of the US) if my price is met, which a cursory glance shows about $100 for FedEx ground. Selling due to health and work reasons.
Any questions, please ask.
Cheers Mates,
Alex
Price: $5800
Location: Albuquerque , New Mexico, USA (Shipping Available -- See below)
Contact: cottone.joe@gmail.com Or by PM
For sale is a new in box Ptuning turbo kit with a new GTX3576R Gen 2 Turbo. I was in the group buy last year, and selected option 2 with the recirculated dump tube ($185 option), as I had intended to go V-Mount. That means the kit comes with everything but the intercooler and piping, which if so desired can be sourced from Ptuning directly for $395 as of writing. The itemized list from the Ptuning re-release thread:
PTUNING Billet Aluminum Motor Mount Assembly
PTUNING Heat shield to protect engine mount
PTUNING Turbo oil Scavenging Pump System (includes all oil lines, fittings, relay, and PnP wiring harness)
PTUNING Equal Length V-Band Turbo Manifold (full T304 stainless steel)
Garrett GT(X)3576R Gen 2 Ball Bearing Turbo with Tial SS V-Band Turbine Housing .82AR
PTUNING 3" T304 SS V-band downpipe
PTUNING turbo manifold T304SS heat shield
Turbo GT oil restrictor, feed, and coolant lines
Turbosmart Hyper-Gate 45mm WG
PTUNING hardware installation kit
See the thread here for more details. You can see my name under the "Deposit Paid" list.
https://www.s2ki.com/forums/s2000-fo...lease-1170300/
I'm asking $5800 which is roughly a 15% discount over what they're selling for now, and I won't be making any money off of it. Everything is new and in the original packaging that PTuning shipped to me. I'd be willing to spring for shipping (within the lower 48 of the US) if my price is met, which a cursory glance shows about $100 for FedEx ground. Selling due to health and work reasons.
Any questions, please ask.
Cheers Mates,
Alex
Last edited by RollCage; 08-23-2018 at 06:44 AM. Reason: Was informed that the SPAL kit was not included with the option 2 turbo kit I received.
06-27-2018, 07:42 PM
#4
From the various users I've seen on this forum, it's going to be about 450-475 HP, and roughly 300Ft.lbs with a good tune on 91 octane, at approximately 13PSI. E85 you can go much higher, around 600hp and over 400 ft.lbs at or over 20PSI, and that's originally what I was planning to do with a flex fuel set up. Riceball777 is a good example of this:
https://www.s2ki.com/forums/s2000-fo...tx35r-1160489/
I have no numbers to post because I couldn't afford to finish the build due to a handful of unexpected surgeries, so the kit is new in box (NIB).
Thanks for looking!!!
https://www.s2ki.com/forums/s2000-fo...tx35r-1160489/
I have no numbers to post because I couldn't afford to finish the build due to a handful of unexpected surgeries, so the kit is new in box (NIB).
Thanks for looking!!!
