Mark this thread as Sold

FS: Recaro SPG - SOLD!

 
Thread Tools
 
Old Apr 28, 2005 | 11:33 AM
  #1  
RevJunky's Avatar
Thread Starter
Former Sponsor
 
Joined: Nov 2000
Posts: 1,683
Likes: 1
From: Irvine, CA
Default FS: Recaro SPG - SOLD!

The seat was used as my passenger seat for less than 5k miles so it was barely sat in. It has been out of the car for a while now. I used Mugen rails so it rubbed a little on the passenger side door because the Mugen rails aren't laterally adjustable. There is a small rub mark on the back of the shoulder part that can't be seen once the seat is in the car. (see pic below) I test fitted it in the driver's side with Mugen rails and it doesn't hit any part of the car, no rubbing either, so it should be the case with any rails you choose. The seat will work with taitec or bride rails which are much cheaper. The rest of the seat is in perfect condition, no rips, tears, or stains. Looks as good as new. Includes all the original box, packaging, and even unused Recaro sticker.

b]SOLD[/b]













Old Apr 29, 2005 | 05:01 AM
  #2  
Saras's Avatar
Registered User
 
Joined: May 2004
Posts: 643
Likes: 0
From: Enköping
Default

Bump for one of the best seats i now!!!

Have them in my Civic Type-R...
/Jimmy S
Old May 3, 2005 | 03:08 PM
  #3  
RevJunky's Avatar
Thread Starter
Former Sponsor
 
Joined: Nov 2000
Posts: 1,683
Likes: 1
From: Irvine, CA
Default

bump
Old May 3, 2005 | 03:45 PM
  #4  
Nishant's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,630
Likes: 0
From: Philly
Default

would this seat work with a 5pt harness? i do not see the middle hole
Old May 3, 2005 | 04:34 PM
  #5  
RevJunky's Avatar
Thread Starter
Former Sponsor
 
Joined: Nov 2000
Posts: 1,683
Likes: 1
From: Irvine, CA
Default

yes, it will, the hole is in between the cushion. i've seen many people use a 5-point with this seat.
Old May 3, 2005 | 04:49 PM
  #6  
Project SSAP1's Avatar
Registered User
 
Joined: Dec 2003
Posts: 3,099
Likes: 1
From: Hackensack, NJ
Default

bump....

I wish i had some extra cash :-(
Old May 8, 2005 | 05:18 PM
  #7  
RevJunky's Avatar
Thread Starter
Former Sponsor
 
Joined: Nov 2000
Posts: 1,683
Likes: 1
From: Irvine, CA
Default

Old May 12, 2005 | 01:59 PM
  #8  
RevJunky's Avatar
Thread Starter
Former Sponsor
 
Joined: Nov 2000
Posts: 1,683
Likes: 1
From: Irvine, CA
Default

bump
Old May 17, 2005 | 06:29 PM
  #9  
RevJunky's Avatar
Thread Starter
Former Sponsor
 
Joined: Nov 2000
Posts: 1,683
Likes: 1
From: Irvine, CA
Default

up up!
Old May 17, 2005 | 06:56 PM
  #10  
Nishant's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,630
Likes: 0
From: Philly
Default

if you were local, would work. i would rather not deal with shipping



All times are GMT -8. The time now is 02:31 PM.