The first project is complete


This is the next project but it will require that I cut my dash!!!
BEHRINGER DEQ2496 ULTRACURVE PRO DIGITAL EQ/RTA
and
BEHRINGER DCX2496 ULTRADRIVE PRO DIGITAL CROSSOVER
IASC Sound quality here I come.

 

someone get that man a wild audio badge!

 

My nicknames at work are speaker freek
or Dr. dB.

Willie Gee are you going to the Tampa mini meet/cruse with the NSX group?

I am thinking about going.

 

better hope that s2k is never outside when it rains

 

Its a hardtop only S2000. all of the softop items wer removed all the way down to the motors and wiring harnesses. Droped 38.5lbs off the car which is the approx weight of the sub enclouser.

Willie do you like your Mugen Lip?
I am selling a Full Veilside Kit to get the funds for a Mugen lip splitter and some other parts for this project.

Whay does my sig not show up every time????
I have signature enable checked

 

Sigs only appear once per post to preserve bandwidth.

 

see

 

Wow that's some crazy but awesome work. I imagine the presentation category will include a big portfolio in IASCA. Have you put the car in the lanes yet? I'm curious to see what it'll meter. The sound stage is going to be interesting as well.

 

First run with mic at the window (ISCA rules IDBL) 136.8dB
Anything over 130db is a waste you don't get any points up there.


Second test 2 weeks later 136.2 Was a bit warmer on the day so the air density was a little lower.

Sound staging is still good the box only gets frequencys below 80hz but don't forget about the bass shakers which help pull the upper bass frequencys forward. And the doors are running down to 80hz so there is a bit of over lap but is tuned down at these frequencys to give a good transition between the two.

 

cut the dash, never retrun.

buy a stock dash as a replacement