Mark this thread as Sold
FS: WORK
Thread Starter
Registered User
Joined: May 2005
Posts: 6,114
Likes: 1
From: Tampa
FS: WORK
sold
Alright Guys, its that time again... for the Rim whore. (self-proclaimed) to Presell a set of wheels.. before i get them...
I will be driving on these for 5 weeks after i get them, (Until my Termist TM1 (4" lip) and VS-KF(4" lip) come in from work..
They will have a maximum of 3 show trips (40-60miles) on the wheels when sold and will be in MINT condition or full refund of deposit will be given.
SO IN A NUT SHELL.. i will be getting them June 16th(ish) driving them until JULY 21st(ish) then shipping them to you on July 8th, 20% down will be needed to hold these and the rest 80%+shipping will be needed on JULY 21st before i ship them.
First EVER pic of MAG BLUE meister
*****wheels came 3p instead of 2p because of slight mixup, my cost is about 182.24$ more but im keeping the same FS price,pics on car next week*****
THESE ARE ONE OF A KIND, NEVER MADE BEFORE WITH 4 INCH LIP, so they will NOT last.
WORK MEISTER S1 3 PIECE
18x8" O Disk 2" lip will fit 215/225 Front tires Fine*
(Will fit Spoon/Brembo/Few more w/o spacers.. but insanely big BBK's like Endless will need a spacer of course)
18x10" O Disk 4" lipwill fit 245/255 tires Fine*
Will Require one of the below Setups to run w/o rubbing:
A: OEM Height
B: DROP+ Rear Fender Rolled, VERY easy.. took me 30minutes working in 100* temp outside basically working in slow motion lol (www.fenderroller.com)<<-- can work out a deal for you.
C: DROP+ Rear Alignment with -3.0* camber or more (NOTE: when you lower a car 2" the most positive you can get camber is -2.7* therefore not much additional camber is needed)(when i dropped my car, w/o alignment it was @ -3.7 from just the drop... and then adjusted more positive to -3.0*)
Color is MAGNESIUM BLUE (color code from VOLK RACING WHEELS)
Price is set @ $2985.00 USD**
** price does not include shipping, but if you are a good seller to work with i will be more than happy to go half on shipping costs VIA FEDEX
contact info:
Riley Wysocki
Rijowysock@aol.com
Aim: Rijowysock
serious inquiries please pm/email with your phone number and i will be more than happy to talk with you over the phone.
again: noone has ever had these made and they are not in yet from WORK so i do not have pics, the closest thing i can find to the exact size of the rear lip is these 2pc meisters in SBC. As SOON as i recieve the wheels. i will have pictures of the wheels, and then 2-3 hours later. pictures of wheels on the car.
people that i have personally talked to regarding the purchase of these wheels please contact me if interested..
picture of rear lip:
again, i am an offset/wheel WHORE and used to make wheels via CNC so please do not whore the thread with fitment issues/etc these will fit FINE with no rubbing if one of the 3 requirements above are made. for specific fitment questions tailored to your car please contact me and i will help situate everything out. MYSELF WOULD NOT DRIVE ON THESE IF THEY DID NOT FIT, NOR WOULD I SELL THEM, so rest assured they will fit. and you will be one of a kind for a long time.
Alright Guys, its that time again... for the Rim whore. (self-proclaimed) to Presell a set of wheels.. before i get them...
I will be driving on these for 5 weeks after i get them, (Until my Termist TM1 (4" lip) and VS-KF(4" lip) come in from work..
They will have a maximum of 3 show trips (40-60miles) on the wheels when sold and will be in MINT condition or full refund of deposit will be given.
SO IN A NUT SHELL.. i will be getting them June 16th(ish) driving them until JULY 21st(ish) then shipping them to you on July 8th, 20% down will be needed to hold these and the rest 80%+shipping will be needed on JULY 21st before i ship them.
First EVER pic of MAG BLUE meister
*****wheels came 3p instead of 2p because of slight mixup, my cost is about 182.24$ more but im keeping the same FS price,pics on car next week*****
THESE ARE ONE OF A KIND, NEVER MADE BEFORE WITH 4 INCH LIP, so they will NOT last.
WORK MEISTER S1 3 PIECE
18x8" O Disk 2" lip will fit 215/225 Front tires Fine*
(Will fit Spoon/Brembo/Few more w/o spacers.. but insanely big BBK's like Endless will need a spacer of course)
18x10" O Disk 4" lipwill fit 245/255 tires Fine*
Will Require one of the below Setups to run w/o rubbing:
A: OEM Height
B: DROP+ Rear Fender Rolled, VERY easy.. took me 30minutes working in 100* temp outside basically working in slow motion lol (www.fenderroller.com)<<-- can work out a deal for you.
C: DROP+ Rear Alignment with -3.0* camber or more (NOTE: when you lower a car 2" the most positive you can get camber is -2.7* therefore not much additional camber is needed)(when i dropped my car, w/o alignment it was @ -3.7 from just the drop... and then adjusted more positive to -3.0*)
Color is MAGNESIUM BLUE (color code from VOLK RACING WHEELS)
Price is set @ $2985.00 USD**
** price does not include shipping, but if you are a good seller to work with i will be more than happy to go half on shipping costs VIA FEDEX
contact info:
Riley Wysocki
Rijowysock@aol.com
Aim: Rijowysock
serious inquiries please pm/email with your phone number and i will be more than happy to talk with you over the phone.
again: noone has ever had these made and they are not in yet from WORK so i do not have pics, the closest thing i can find to the exact size of the rear lip is these 2pc meisters in SBC. As SOON as i recieve the wheels. i will have pictures of the wheels, and then 2-3 hours later. pictures of wheels on the car.
people that i have personally talked to regarding the purchase of these wheels please contact me if interested..
picture of rear lip:
again, i am an offset/wheel WHORE and used to make wheels via CNC so please do not whore the thread with fitment issues/etc these will fit FINE with no rubbing if one of the 3 requirements above are made. for specific fitment questions tailored to your car please contact me and i will help situate everything out. MYSELF WOULD NOT DRIVE ON THESE IF THEY DID NOT FIT, NOR WOULD I SELL THEM, so rest assured they will fit. and you will be one of a kind for a long time.
Thread Starter
Registered User
Joined: May 2005
Posts: 6,114
Likes: 1
From: Tampa
for comparison reasons (Meister have a step lip vs the flat lip of these VS-KF
but the lip will be the same size as these (step lip makes it appear even bigger*)
mm for mm the meisters will have the same as DAT's car from Speed Alliance (Ob- if you want me to remove pics i will, just used for comparison)
but the lip will be the same size as these (step lip makes it appear even bigger*)
mm for mm the meisters will have the same as DAT's car from Speed Alliance (Ob- if you want me to remove pics i will, just used for comparison)
Thread Starter
Registered User
Joined: May 2005
Posts: 6,114
Likes: 1
From: Tampa
^^ work has NEVER made an S1 in MAG blue before, so therefore their are no pics.. Evasive has some VSXX in w/ pics but their blue didnt show up well in the pictures.
the color will be as such:
pic borrowed from friend ED
btw DIVERSEASYN i know someone interested in your wheels if you wanted to sell to them, again IM/PM/EMAIL for info
the color will be as such:
pic borrowed from friend ED
btw DIVERSEASYN i know someone interested in your wheels if you wanted to sell to them, again IM/PM/EMAIL for info
Registered User
Joined: Feb 2005
Posts: 4,633
Likes: 0
From: homeless!!
OMG those are gonna be hot! Bump for you and your taste in wheels!
Diverseasyn, I've been drooling over your works for the past year! Not that I can probably afford them, but could you post or PM me a price you would be looking to get for your wheels?
Diverseasyn, I've been drooling over your works for the past year! Not that I can probably afford them, but could you post or PM me a price you would be looking to get for your wheels?
