Mark this thread as Sold
1012 EMS, UEGO, Defi
AEM 1012 EMS - $950 shipped Pending Sale
AEM UEGO Wideband Gauge/Controller - $210 shipped Pending Sale
Defi D-Series Oil Pressure Gauge - $185 shipped
Autometer Dual A-Pillar Pod - $55 shipped
Everything together $1380 shipped
EMS + UEGO together $1150 shipped
Here is everything together:

As you can see, I am including the serial cable for the EMS as well as a serial-usb adapter, and the software associated with it. And since I printed it out, you get the manual for the EMS as well. And of course basemaps and any maps I have.

Now, I know that the gauge on its own can be purchased for $200 new...however I am also including a t-fitting to bolt to the stock oil pressure sender location ($5) as well as a 1 ft. stainless braided line ($25) with the gauge so you have everything you need to install it...I haven't decided if I'll send the relay out with the UEGO or the Defi yet, but there is a relay to go with it too.
The Defi

The UEGO

Here are how the gauges look mounted together though they are not pressed in fully...and lit.


Last is the A-pillar...I also know that these can be purchased alone for a little over $50 + shipping...this might make my price seem rediculous. However, I'm selling an "installed" A-pillar. It is already mounted to my stock A-pillar, the stock A pillar has the holes cut in it to allow the wires to pass through it and make sure there are no gaps with the fitment of the A-pillar, to give it a clean and stock look. I do NOT need your stock A-pillar, I bought a new one so you could keep yours if you ever remove the gauges.

I am also open for trades, main things I am interested in are but not limited to:
CE28s
KWv3's
Mugen SS rear/exhaust
CTSC no AC
AEM UEGO Wideband Gauge/Controller - $210 shipped Pending Sale
Defi D-Series Oil Pressure Gauge - $185 shipped
Autometer Dual A-Pillar Pod - $55 shipped
Everything together $1380 shipped
EMS + UEGO together $1150 shipped
Here is everything together:

As you can see, I am including the serial cable for the EMS as well as a serial-usb adapter, and the software associated with it. And since I printed it out, you get the manual for the EMS as well. And of course basemaps and any maps I have.

Now, I know that the gauge on its own can be purchased for $200 new...however I am also including a t-fitting to bolt to the stock oil pressure sender location ($5) as well as a 1 ft. stainless braided line ($25) with the gauge so you have everything you need to install it...I haven't decided if I'll send the relay out with the UEGO or the Defi yet, but there is a relay to go with it too.
The Defi

The UEGO

Here are how the gauges look mounted together though they are not pressed in fully...and lit.


Last is the A-pillar...I also know that these can be purchased alone for a little over $50 + shipping...this might make my price seem rediculous. However, I'm selling an "installed" A-pillar. It is already mounted to my stock A-pillar, the stock A pillar has the holes cut in it to allow the wires to pass through it and make sure there are no gaps with the fitment of the A-pillar, to give it a clean and stock look. I do NOT need your stock A-pillar, I bought a new one so you could keep yours if you ever remove the gauges.

I am also open for trades, main things I am interested in are but not limited to:
CE28s
KWv3's
Mugen SS rear/exhaust
CTSC no AC
Thread
Thread Starter
Forum
Replies
Last Post
Foursquare412
Archived Member S2000 Classifieds and For Sale
14
Oct 7, 2010 09:02 AM
Driv300mph
Archived Member S2000 Classifieds and For Sale
6
Jul 12, 2010 07:43 PM
nexus
Archived Member S2000 Classifieds and For Sale
0
Apr 3, 2010 10:34 PM



