Mark this thread as Sold
JIC exhaust, OEM Intake/Flywheel !Prices Dropped!
Thread Starter
Joined: May 2004
Posts: 3,403
Likes: 6
From: DFW, TX
JIC exhaust, OEM Intake/Flywheel !Prices Dropped!
Ok, so I've just found this and I need to sell anything I can to get some extra money to pay for fixing it.
JIC 60mm Single + testpipe - $old
OEM intake - $50 shipped
Passenger A-pillar - $old
OEM flywheel - $old
I've got my JIC 60mm single with testpipe for sale. The condition of it is good...there are no dents or major scrapes on the exhaust or muffler. There is the typical discoloring and as you can see, on the muffler there is a dark spot, but that is from the hanger, and is covered by the hanger. Also, JIC is unfortunatly known to have resonators fail...mine did, and as you can see I had a new straight flow resonator welded in. The welds aren't pretty, but they are beefy and are not going to break. I also had the same resonator welded into the testpipe and it really give the exhaust a nice tone, though its a little to loud for me.
The OEM intake is the original one from my car, it has the OEM air horn already taken out for somebody looking to do a snorkle type system. Personally I want an AUT style cooling plate and not a snorkle. So I bought an OEM intake with the air horn. This is perfect if you are looking to do a snorkle and would like to keep your intake stock incase you go back to stock. While I only picture the lower portion of the box, the lid and tube etc. will come with it.
The flywheel is simply and OEM flywheel, and the S02's are gone on what was the inside but they can be swaped to the opposite side and probably get some life out of them...because of shipping costs I wouldn't expect somebody to want me to ship them to them, I'd only want $10 for them.
JIC 60mm Single + testpipe - $old
OEM intake - $50 shipped
Passenger A-pillar - $old
OEM flywheel - $old
I've got my JIC 60mm single with testpipe for sale. The condition of it is good...there are no dents or major scrapes on the exhaust or muffler. There is the typical discoloring and as you can see, on the muffler there is a dark spot, but that is from the hanger, and is covered by the hanger. Also, JIC is unfortunatly known to have resonators fail...mine did, and as you can see I had a new straight flow resonator welded in. The welds aren't pretty, but they are beefy and are not going to break. I also had the same resonator welded into the testpipe and it really give the exhaust a nice tone, though its a little to loud for me.
The OEM intake is the original one from my car, it has the OEM air horn already taken out for somebody looking to do a snorkle type system. Personally I want an AUT style cooling plate and not a snorkle. So I bought an OEM intake with the air horn. This is perfect if you are looking to do a snorkle and would like to keep your intake stock incase you go back to stock. While I only picture the lower portion of the box, the lid and tube etc. will come with it.
The flywheel is simply and OEM flywheel, and the S02's are gone on what was the inside but they can be swaped to the opposite side and probably get some life out of them...because of shipping costs I wouldn't expect somebody to want me to ship them to them, I'd only want $10 for them.
Thread Starter
Joined: May 2004
Posts: 3,403
Likes: 6
From: DFW, TX
WTF....I posted a reply, appearently it didn't show.
Anyway, you can see the exhaust in person whenever you would like...problem is, it is already wrapped for shipping...ready to go, all that bubble wrap in the background I had to take off to take pictures.
If you would like the exhaust, just PM me.
Anyway, you can see the exhaust in person whenever you would like...problem is, it is already wrapped for shipping...ready to go, all that bubble wrap in the background I had to take off to take pictures.
If you would like the exhaust, just PM me.
