Mark this thread as Sold
★☆FS F&R Drilled Slotted Rotors☆★
Thread Starter
Registered User
Joined: Nov 2006
Posts: 169
Likes: 0
From: SoCal
★☆FS F&R Drilled Slotted Rotors☆★
As a tittle stated, have few set brand new Drilled Slotted rotors for the S with silver zinc to protect rotors from getting rusty, letting these go for cheap. Good for track day or upgrade your stock rotors for better braking performance & look of course.
These rotors are made by Centric, check it out at www.centricparts.com
For local buyer will offer extra charge for installation, most likely only for weekend.
Shipping is available if buyer willing to pay S&H.
PM me if you have any questions or
Kevin (714) 829-9808
Thanks for looking
These are the rotors pics.
Local member S's pix after installed the rotors
Borrow pix from other member on board, rotors should look like this
These rotors are made by Centric, check it out at www.centricparts.com
For local buyer will offer extra charge for installation, most likely only for weekend.
Shipping is available if buyer willing to pay S&H.
PM me if you have any questions or
Kevin (714) 829-9808
Thanks for looking
These are the rotors pics.
Local member S's pix after installed the rotors
Borrow pix from other member on board, rotors should look like this
Trending Topics
Thread Starter
Registered User
Joined: Nov 2006
Posts: 169
Likes: 0
From: SoCal
Has anyone else noticed that the front rotor on the Rio is on backwards?
https://www.s2ki.com/forums/index.ph...c=640291&st=25
QUOTE
those don't look right, aren't they on the wrong side?
No they are not on the wrong side. This set up the slotted rotor face the opposite directional give it more aggressive braking performance. thumbsup.gif I have the same set up on my S and loving it.
those don't look right, aren't they on the wrong side?
No they are not on the wrong side. This set up the slotted rotor face the opposite directional give it more aggressive braking performance. thumbsup.gif I have the same set up on my S and loving it.
QUOTE (marlonRocks @ Oct 26 2008, 11:59 AM)
those don't look right, aren't they on the wrong side?
It really depends on what the manufacturer recommends. I think it that if they are OEM replacement sizes, it makes no difference as to which way the slots are facing. I personally went with the way Brembo and Stoptech recommend (slots pointing away from the hub).
user posted image
those don't look right, aren't they on the wrong side?
It really depends on what the manufacturer recommends. I think it that if they are OEM replacement sizes, it makes no difference as to which way the slots are facing. I personally went with the way Brembo and Stoptech recommend (slots pointing away from the hub).
user posted image