I just wanted to share my results from last weeks dyno tuning. It was the best experience I've ever had at any speed shop. Im very happy with the tune and the car drives like a champ Much thanks to Jason and his crew @ PSI (Portland Speed Industries)

Engine Mods:
Greddy Turbo Kit
Berk 70mm HFC
Invidia V4 Exhaust

333rhwp/236tq @ 10.5 PSI - dynojet dyno








http://farm4.static.flickr.com/3414/321918...c39846a19_o.jpg
[media]http://www.youtube.com/watch?v=Q77W6m5O02Q [/media]

 

sweet . u using emanage?

 

... Add some meth and up the boost to 12 psi and I would think you would be over 350... Enjoy the new boost!!!

 

wow that's some of the best numbers I have seeen with the greddy it. Nice job, nice set up.

 

I have the exact same set up, same CAT, same exhaust! I wish I could make those numbers...
I am also interested to know if you are using emanage.
I assume that your tuner is in Oregon.
I need a good tuner in NC, hopefully National Speed will hook me up.

Looks like you are blowing a lot of white smoke in that second video. What are your AFRs?

 

Sweet, i was not expecting those kind of numbers, especially on a dynojet, thats awesome though

 

Good numbers there with that tune.
That dyno room looks insanely nice also.

 

x2. that shop must be very nice inside to have a dyno area that sweet.



congrats on the numbers. does your car rev higher then 8200? i see the dyno is speed, and it goes to like 108, i could only hit 108 with a 8500rpm rev limit on my ap2.

sweet powa numbers

 

boostftw,

you should post up those other pics of the shop you have, it is indeed a very impressive shop, with equally impressive shop cars.

 

Great numbers. I didn't even get close to that on a dyna pack!