4x 25mm aluminum spacers with long studs (BRAND NEW)
$180 shipped (or $99 shipped for a pair)

Shipping is through UPS ground with tracking.



On tightcrap7's car...




Get flush on stock wheels or space out your "standard" offset wheels for a more aggressive stance!

See this thread for more info on using them with stock wheels.
https://www.s2ki.com/forums/index.php?showtopic=668408

 

im still undecided i had 25mm on the rear of my S wit the stock ap1 V1's but they were out too much..how do the 15mm's set out the rear wheels?

 

the 25mm's will work with around -3.5 camber in the rear and rolled fenders. The H&R's are hubcentric for the front.

 

alex i currently have rpf1s in 17x7 +45 and 17x8+45, could i run the 15s up front and the 25s in the rear?

 

Yes, shoot me a PM. I'm willing to split up a pair of 25's.

 

Damn! I wish these were the ones with the integrated studs.

 

The 25's are. The H&R's need to be pressed in.

 

How do I fit this on an ap1 lowered on stechs? The 25mm I mean. Would I need to roll fenders?

 

I would recommend rolling fenders although it should technically work without rolling.

 

The 25's are integrated.. so that means the studs already mounted on the spacers? So all I would need to do is put them on over my hubs?