Mark this thread as Sold
FS: Spoon ECU
Quoted from "allmotorslut" who has a Spoon ECU on his AP2:
yeah it a plug and enjoy ecu lol you just need to bypass the fuel pump ground to the ecu and it will run. i think on the wiring diagram is the A15, a yellow/green wire, because JDM ap1 dont have immobilizer.
With a 70mm exhaust, header and an intake...you will see a major diff in the top end, vtec pull way better, i have run 03 ecu before and spoon ecu is WAY better, but i think to run it safier you will need to raise the fuel pressure a lil to get more richier because on a ap2 with theses mods, you are border line to be lean, BUT i've done 20 000km of hard beating and got NO problem, i've done a couple of compression test and always perfect, nothing strange in my oil during my oil change, my retainers are still in great shape.
With a 70mm exhaust, header and an intake...you will see a major diff in the top end, vtec pull way better, i have run 03 ecu before and spoon ecu is WAY better, but i think to run it safier you will need to raise the fuel pressure a lil to get more richier because on a ap2 with theses mods, you are border line to be lean, BUT i've done 20 000km of hard beating and got NO problem, i've done a couple of compression test and always perfect, nothing strange in my oil during my oil change, my retainers are still in great shape.



