Greddy E-Manage Ultimate Harness PnP
 

Ok So I got a new E-manage Ultimate and it also came with the AP1 PnP Harness.
I have a few questions. but before the Q here is my setup
2000 S2000 with 2.2 Motor
AP1 ECU

1. It came with version 2.13, Will I need to change this to V 1.XX?

2. The harness has a few extra wires that have plugs, does anyone know what they are?
There is a total of 9 Plugs. 8 are one wire plugs and one is a 2 wire plug.


3. I am using window Vista 32 Premium. Has anyone having problems using Greddy's Software with Vista? It loaded just fine..

I am going to attach a scan of the instructions that came with the PnP harness. Maybe someone can translate it. Thanks for the help. Chris






https://cimg3.ibsrv.net/gimg/www.s2k...1bd993846f.png

Update:
Vista seems to work with the E-Manage software.

I left all the wires disconnected except 1 and everything seems to be working fine.

I installed this at the body shop and was unable to drive the car however I let it run for 10 minutes and no check engine light.. Idle seems to be good also...

Hey Crafty Im In NJ also where are you going to tune I also have EMU

I am tuning at Motorsports on main ave in Clifton, they have a mustang dyno..