Vladimir L

If I do I dont want to get a stroker kit. I just want to raise my compression with pistons. Then get the head completely reworked on. I know alot of you have tried Toda A's and have barely seen any gains. Well arent Toda A's almost like stock? I Know on the ITR there isnt a big difference between stock type r cams and toda A's.

Slows2k

Sounds like a question for the JDM forum, Moving there now.

LoooseGSR

Toda A's are fine on stock valve train, however going with anything would require going with Toda's valve train kit. The A's are not at least in the DC2 world, very close to the same as ITR's. The A's have proven substatial gains on stock type-r motors.

spider2k

but what about on the s2k. one of the main mods i wanted was a set of cams and i havent seen enough good posts through all my searching that would convince me that it would be a good thing.

something along the lines of cams,valvetrain and e-manage/vafc. these 3 going to make power or am i going to dump 2-3k on parts/labor for nothing?

anyone with positive experience with the toda head package that can chime in? id love to do this as adding cams to my b16a3 made a hell of a difference.