liquid_helix136

Name: Chase
Location: DFW,Tx
Contact: PM for fastest response!

I've decided to go elsewhere for my tuning needs for my upcoming F/I project, so I'll be letting this go.

It recently had some issues with random misfires, vtec not engaging and trouble connecting to my laptop, so I sent it into AEM and they found that hardware piece "Q5" was malfunctioning, and the unit was fully repaired by AEM a couple weeks ago. I only reinstalled it to make sure that it was still working, and all the problems seemed to be resolved, no misfire, vtec engages at 3800 like it's supposed to in the tune and it not once disconnected from the laptop.

I have the email receipts and RMA number of the repair if one desires to see it.

*Updated* Pic of the EMS in the box, you can see the serial gauge / CD in the picture. The instruction manual is included in the box as well

You will also receive the Modifry temp gauge fix, this only works for 00-03 AP1 S2ks.
I will also be including the serial cable + serial to USB adapter that I purchased from radio shack for $40. It has worked flawlessly, unlike the $5 cheap ebay cords you can find. I was able to get the $5 cord to work for a total of 10 minutes before it crapped out on me.








Tune included was originally e-tuned by Jeff Evans, but has since been completed redone by myself. It's currently tuned for AEM v2 intake, stock header, 63.5mm TP and Invidia Q300 dual exhaust. Closed loop wideband o2 feedback is enabled and all accel / decel tables were tuned for my car specifically. Vtec engagement is at 3800 rpms over 45% throttle, and the ignition timing is mapped for 93 octane e10 gasoline.

*If you run this tune on your car, I am not responsible for any potential damages that may occur. My car ran safely on it for over a year, however all cars are different, and fuel / timing will be different for different modifications, use at your own risk*

Price: $725 shipped and paypaled! $$$OLD!

I will be selling the AEM Serial Gauge (Part #30-4300) that hooks up to the EMS as well. I had it installed in my car, but the software was super confusing so I never really had it doing anything. I planned on having it set up when I took the car to a tuner, but since I'm swapping to a different EMS solution, I wont be needing this either. Everything is like new in the box, EXCEPT that I lengthened the wires on the wiring harness by about 4". I took a picture of this so you can see.

I wired up my own nitrous system about a year ago and didn't have any electrical problems with that, and this worked just fine as well. The reasoning for making these wires longer is that they weren't long enough to mount the gauge on the A-pillar (even on the lowest perch)

Everything is included with the serial gauge that you would get from AEM if you bought it brand new except the instruction manual, which I wasn't able to find. These instructions are posted online on their forum however, so they are still available to you.

Price: $150 shipped & Paypaled! $$$OLD!







Everything is perfect working order to my knowledge, however if you have any questions, please PM me!

Thanks!

liquid_helix136

Up!

FlushS2000

willing to part the modifry temp gauge fix? lmk thanks

liquid_helix136

If someone comes along interested in the EMS without the temp fix, I'll part it, otherwise I'd prefer to keep them together for now.

liquid_helix136

Added Serial Gauge to post as well!

liquid_helix136

Up

FlushS2000

well keep me updated, cash in hand ready

liquid_helix136

All items sold!